Dissected an unnamed sellers 24v swap wiring adapter

[MaksV]

So i currently have no power going to ICV, no power going to K5 relay, as well as a few other problems. I got my adapter from Erick. I dont know if he is the one you guys are tlaking about, but any help would be greatly appreciated. Its na NVM50 and it sounds like i am having the same issue you were. I am going to tap and add another ICV plug into the harness this weekend, to double check its the one that is

Yellow/white:red/white:green/white

right? cause I need to get the car running. 328ijunkie if you want to pm me the info instead of post onhere thats fine too, i am just looking for some help.


I only bought the harness to save time on the swap. turned out to be a bit of a mistake.

[Dominic49]

i made a couple adapters back in the day before people wanted to send me harnesses. the one i did for Swords, word on the street is the VSS isnt hooked up. his being my first obd2 harness (not that much is different) i was 99% sure that it was ok what did i miss? in my excel i have the VSS labeled... then again he did nearly burn down his harness by plugging the wrong relay in the wrong hole >.<

[328ijunkie]

So i currently have no power going to ICV, no power going to K5 relay, as well as a few other problems. I got my adapter from Erick. I dont know if he is the one you guys are tlaking about, but any help would be greatly appreciated. Its na NVM50 and it sounds like i am having the same issue you were. I am going to tap and add another ICV plug into the harness this weekend, to double check its the one that is

Yellow/white:red/white:green/white

right? cause I need to get the car running. 328ijunkie if you want to pm me the info instead of post onhere thats fine too, i am just looking for some help.


I only bought the harness to save time on the swap. turned out to be a bit of a mistake.

PMed you

i made a couple adapters back in the day before people wanted to send me harnesses. the one i did for Swords, word on the street is the VSS isnt hooked up. his being my first obd2 harness (not that much is different) i was 99% sure that it was ok what did i miss? in my excel i have the VSS labeled... then again he did nearly burn down his harness by plugging the wrong relay in the wrong hole >.<

As i did you ;)

[alpinescott]

ERIC!
Good to know AKG worked for you. I hope the one I just ordered from them works as well. s52, OBD1 conversion, 91 318is......future fun car!!

[Oz10]

I PMed the seller of my faulty adapter. I'm interested in seeing what he says.

I would recommend that anyone else interested in doing a 24v swap either hardwire their harness or buy an adapter from a reputable source.

Thanks again for the help Dave!

[328ijunkie]

Anytime! Glad youre up and going!

[BraveUlysses]

Amazingly enough, the person in question is selling another swapped car right now on the puget sound bmw cca forum.

[328ijunkie]

Interesting.

[jrdeamicis]

I use vampire taps, duct tape and super glue to make my harnesses!

$100 bucks. Any takers?!

[blazing]

Out of curiosity did the adapters look like this?

[Mr.SWISS]

How about you name who it WASN'T!?

posting a pic doesnt identify the seller, and if it does then he/she deserves to be identified..


anyway if no pics are posted by 4pm AEST i will fill this thread with photos of hotdog vendors

Is his name similar to the post above?

I will have a go at anything, building engines, painting, ANYTHING to do with my cars except wiring.

I have worn "Electricians Aftershave" (aka the smell of burning wires) in the past, am not confident enough with a multimeter so this is one area I have no shame in paying someone.

Hint:

His username sounds like:

Kraigslow318i

[328ijunkie]

Not necessarily.

[Wanganstyle]

I use vampire taps, duct tape and super glue to make my harnesses!

$100 bucks. Any takers?!

yes. I used 1,100 vampire taps to wire my S54+ standalone. lol

can you give me a discount on it, like if I supply my own superglue and duck brand duct tape?

[328ijunkie]

Dude gorilla tape is where it's at

[Wanganstyle]

Dude gorilla tape is where it's at

ya, but duck brand is avail at wal mart where I buy vampire taps!!!