Announcement

Collapse
No announcement yet.

94 m50, 86es (cluster question)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    sounds like a short somewhere to me. well either an open or short. when i had thwe wrong wire hooked up for my tach it would peg when i hit the key and not move when the car was running.

    Comment


      #17
      Originally posted by umana12 View Post
      so still no luck on the gauges. i replaced the cluster with the correct one and i still got nothin. temp gauge still goes straight to hot when key on. mr 325 i dont drive my car. havent driven it in a year. i would never drive a car without knowing the temp.
      sounds like your temp sender isn't hooked up
      Build thread

      Bimmerlabs

      Comment


        #18
        so i unplugged the connectors and the engine harness from the body harness and everything stayed the same..still on hot and still half tank when truely empty..i will be replacing the cluster tomorrow and see if maybe its the cluster..dont think ive mentioned this but rpms do work..

        Comment

        Working...
        X