The OFFICIAL 24v Engine Bay Thread

[markseven]

Palantirion was kind enough to snap some pics...

[Edev]

Oh gosh! I didn't have a clue that you were 24v swapped, Mark! Nice motor you've got there :) incredibly clean engine bay too!

[markseven]

Oh gosh! I didn't have a clue that you were 24v swapped, Mark! Nice motor you've got there :) incredibly clean engine bay too!

Hey Eric, thanks man! She was swapped over the summer. There's a thread here and on bfest.

[herlsy]

Just dropped mine in over the weekend, very bare right now, work in progress....

[mikeday]

old pics but heres mine :)

[White325is]

S50 swapped 318

[Be30mer]

Oh gosh! I didn't have a clue that you were 24v swapped, Mark! Nice motor you've got there :) incredibly clean engine bay too!

did you ever look at his sig?

[markseven]

did you ever look at his sig?

That sig is brand new ;)

[Snake____1]

Where do you guys get these brake fluid resoars, and the couplings to the MC?:roll:






By the way... The begining of my 24v ride:-D 325IX With 4WD still active8) The intake manifold is to be changed out with OEM as soon as i can ged the HydroBrakeBooster up and running;)

[markseven]

Where do you guys get these brake fluid resoars, and the couplings to the MC?:roll:






By the way... The begining of my 24v ride:-D 325IX With 4WD still active8) The intake manifold is to be changed out with OEM as soon as i can ged the HydroBrakeBooster up and running;)

Mine's from a 2002. I'm pretty sure this is the correct PN for the connectors (hose to MC) 215 211 516 97

Is your's the first swapped ix? Sounds like an awesome project!

[Snake____1]

Mine's from a 2002. I'm pretty sure this is the correct PN for the connectors (hose to MC) 215 211 516 97

Is your's the first swapped ix? Sounds like an awesome project!

TNX

Regretfully no, this is not the first. But very awesome, the power gets to the ground even on solid snow:pimp: To bad the engine gets tilted even 10 more degrees to the drivers side, thats what the intake fuss is all about

[Be30mer]

That sig is brand new ;)

whoops, Im new too
Btw what wheels do you have on there? I like

[Wh33lhop]

Where do you guys get these brake fluid resoars, and the couplings to the MC?

The reservoir pictured is a remote reservoir out of a 2002. Personally I used some low-pressure brake line (blue stuff pictured) and 90 degree brass fittings to couple it to the master cylinder:





But there are other options to go with as well.

[tupiace]

hiii guys...

im looking to modify an e30 and getting 250+ rwhp N/A

ive been speaking to e30 finatics and there telling me to put a S52 engine with cams, computer, re map and exhaust system etc etc

would this be the best conversion ? i saw in the begining of this thread a car built my BMW332i was crazy.. 286rwhp.. does anybody know how much that cost him ?

[BimmerTim]

A lot.