M50 dme

[Wanganstyle]

Not really, I want to supercharge the m50 towards the end of next year. Just want to sort
It out to avoid any issues later.

May look at the miller war chip setup.

I think you missed the point:


Nv electronics do not have knock sensors.

Vanos is a lovely feature to have; both top end and bottom end power increase.

Miller war was availible for vanos 413 computer and setup; not for nv last time I checked.

You could also mechanically remove the vanos / intake cam and convert the entire engine to non vanos


Sent from my SAMSUNG-SGH-I337 using Tapatalk

[pazza]

ok, had a look on the side of the block and no knock sensors.

So my next question is, can a vanos head be fitted to a non- vanos block??
if so is this what has been done here??

[Wanganstyle]

ok, had a look on the side of the block and no knock sensors.

So my next question is, can a vanos head be fitted to a non- vanos block??
if so is this what has been done here??

Nv blocks dont have threads for knock sensors but the casting is there and can be drilled / tapped.



Sent from my SAMSUNG-SGH-I337 using Tapatalk

[M-technik-3]

Yes to the last question. A vanos head will bolt on.