My m50 is pinging. Running out of ideas.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Dj Buttchug
    replied
    Originally posted by Wishno87
    Thanks for the update. I have not resolved my pinging yet at this point. Did you see any physical damage that could have been from the detonation? I'm about to swap mine with an aluminum m52 soon but the GFs e34 still has the issue.

    no damage to the head or pistons but my valves were pretty shot. Some where burning in small areas and there was tiny chips.

    Leave a comment:


  • Wishno87
    replied
    Thanks for the update. I have not resolved my pinging yet at this point. Did you see any physical damage that could have been from the detonation? I'm about to swap mine with an aluminum m52 soon but the GFs e34 still has the issue.

    Leave a comment:


  • Dj Buttchug
    replied
    This is a long ass thread with several issues that could all cause the problem. Reporting now after I tore my engine down and did a complete top end rebuild this is what I have found.

    First, my engine is 200k plus and was not taken care of very well by previous owners. Likely a combo of shitty gas, worn plugs and oil change intervals that were never done on time caused my combustion chamber to look like this.




    As you can see the carbon buildup is pretty bad. I dont have any pics of the valves or head but just imagine about the same amount of buildup on the valve heads and the surrounding area. Basically the whole combustion chamber was caked with it.


    I posted in my e34 thread but im convinced the reason for detonation was carbon buildup. It made my car sluggish and it had no balls up top. At first I thought it was normal because m50 is just m50 and its slow as shit anyways but now after a fresh top end its a whole new engine. Its still slow but it totally rips. Much more top end pull, just better all around. I cannot get the engine to detonate or ping under any load, at any speed.


    For those that still have issues you may want to stop throwing parts at your engine, pull a spark plug and take a peek down inside to see how bad it really is. Maybe get a piston on TDC and scrape the top with a screwdriver to see how deep the buildup is. I donno.

    Leave a comment:


  • wakdog
    replied
    Im having problems with my S50 pinging recently - only happens for me at partial throttle as you go past ~4100rpm and only does it for 100-200rpm... Ive replaced my o2 sensor, tried a new MAF, changed fuel pressure reg, injectors are brand new 6k miles ago. I even tried another tune for my setup (24lb injectors + euro MAF) and it still did it :(

    My car does make a fair bit of marbles in can noise as you decel - i know the vanos is on the way out but still not sure if this is the issue...

    Leave a comment:


  • THEhomelessONE
    replied
    I'm getting OBD codes for nonexistent problems
    Really want to know what's causing your ping problem, good luck m9.

    Leave a comment:


  • ak-
    replied
    Get that wideband working

    Leave a comment:


  • Wishno87
    replied
    Just did a comp test and the #s are
    179
    181
    168
    180
    181
    170

    Leave a comment:


  • Habla
    replied
    My OBD is also oblivious to my m50tu's 3500 rpm cut. I'm thinking that the fuel pump is dying.

    Try driving around with the pressure gauge visible, to see what happens under load?

    Leave a comment:


  • Wishno87
    replied
    Originally posted by amcink
    Did you get any codes
    Man if I could get one code....just one code....... ANY CODE! That would make this soo much easier lol. But no the OBD is entire oblivious to what is happening.

    Leave a comment:


  • amcink
    replied
    Did you get any codes

    Leave a comment:


  • Wishno87
    replied
    Originally posted by surebimmer
    and the thread is dead?
    No I'm still working on it I'm just about out of ideas. I have replaced everything that can affect A/F ratio and nothing makes any diffrence. I usually get gas at chevron but I will try shell for a while.

    I have two more things I will try before I take it to a shop to pay some goons to tell me "I don't know what's wrong".
    Compression test and possible replace the main external fuel pump or maybe throw in some other injectors.

    Leave a comment:


  • surebimmer
    replied
    and the thread is dead?

    Leave a comment:


  • surebimmer
    replied
    Your gauge is showing 3.2 bar so i would say your fine on fuel pressure. You can also do a volume test and see if the pump is flowing enough fuel.

    What brand of fuel are you using? My car would ping like crazy with shell gas and run better with every other brand. Try a different brand and see what happens.
    Last edited by surebimmer; 10-24-2014, 08:08 PM.

    Leave a comment:


  • Wishno87
    replied
    Just installed a brand new oem maf. Still nothing.

    Leave a comment:


  • Wishno87
    replied
    Originally posted by 328ijunkie
    its 3.5 bar with no vacuum on it.
    So am I having a problem with fuel pressure or no? Because I have tried just about everything and nothing seems to have an effect. The e34 is completly stock and a 100k car but does the exact same thing. It's really driving me crazy.

    Leave a comment:

Working...