Fs: S54

[Fernflex]

[Fernflex]

Found a quote to NORTH HOLLYWOOD, CA 91605 for less than $500

[absolutdog]

[Fernflex]

The quote I got is by boat and then by road.

[Leo_328i]

Sent you a PM!

[Fernflex]

If you need any feedback from me you can talk to Luis325 or Flavio from Ireland engineer. Im a local dealer for burgertuning.com for all 135 and 335, you can ask Jon or Terry. Also my ebay as fernflex or feedback from www.e90post.com other forums.

The transmission on Ebay are between $720 ans $3,200 plus shipping only for Smg transmission engine start at $3,400 up to $7,500 plus shipping.

Im selling this engine and transmission shipped at half the price you would pay, If you don't want the transmission I can take $300 from the price.

[Luis325]

Cant believe this hasnt sold....

[Fernflex]

[ForcedFirebird]

Quote shipped to Miami please?

[Fernflex]

Also In this pictures you don't see the Smg ecu, pump and transmission.

To Atalanta and TN I got a $300 quote and 10 days to be delivered, to Miami should be around $200-$250 and a lot easier and faster.

[ForcedFirebird]

Also In this pictures you don't see the Smg ecu, pump and transmission.

To Atalanta and TN I got a $300 quote and 10 days to be delivered, to Miami should be around $200-$250 and a lot easier and faster.

I need a total shipped, don't need the trans but would like a price with/without. Have a client at my shop looking for one and need to know what it will be dropped off all said and done. We have semi-trucks in/out all day and a forklift available. You can PM if you prefer.

Thanks!

[nando]

Damn you :p

[ForcedFirebird]

Damn you :p

Wish I could afford the time to use it myself, but I already have to cull my herd since I have 3 e30's ATM and the shop is quite busy, plus this hand injury slowing down progress :(

The client passed on an s52 we had and wants an s54 for his e36, so pending price shipped it may happen. Still want to update the bearings and have the ECU flashed, but I need a solid number for him installed and running.

[Fernflex]

Pending Sale

[e304me]

You should be able to check the vin with a dealer to see if the rod bearing recall was done...