S54 swap into an E30 racecar with MarkD ECU tuning

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MarkD
    Forum Sponsor
    • Sep 2004
    • 486

    #16
    Originally posted by nando
    who's going to be doing that for you? gutenparts?
    I hope to use Gutenparts, but I will also be using my regular shipper of OBD-1 chips who is a friend of mine, I'll be staying at his house during Oktoberfest in Columbus next month.
    URL: www.dsylva-tech.ca

    Comment

    • MarkD
      Forum Sponsor
      • Sep 2004
      • 486

      #17
      Originally posted by 240zs30
      Do you have a price point for this yet?
      I have a very good idea what I want to charge in the end, but am not sure what the market will think of those prices. The way I see it, you can't only decide who to use based on price alone as I know very well that some of the people offering this service are just copying flashes they read from other ECU's, and I can't compete with them. Let's say that my price will be a great deal for what it is, and compared to what a well known place in the USA charges for just the S54 swap software without a tune. (they say on their website that they dropped the price to $1600 but that does not include a performance tune). I am still wanting to charge $1800 with a performance tune. The people that sent me DME's so far are getting a discount off that price for being the first to use my services.
      URL: www.dsylva-tech.ca

      Comment

      • ForcedFirebird
        R3V OG
        • Feb 2007
        • 8300

        #18
        Great news Mark!

        I am glad to see you taking advantage to TunerPro. I have been using Mansur's software and Moates hardware for years, good stuff.
        john@m20guru.com
        Links:
        Transaction feedback: Here, here and here. Thanks :D

        Comment

        • MarkD
          Forum Sponsor
          • Sep 2004
          • 486

          #19
          Originally posted by ForcedFirebird
          Great news Mark!

          I am glad to see you taking advantage to TunerPro. I have been using Mansur's software and Moates hardware for years, good stuff.
          I have also used TunerPro and Moates hardware for years, just not on the S54.

          And the Moates emulator sure beats the one I bought about 12 years back from Racelogic in the UK, that one was over $4000 by the time I got it into Canada
          URL: www.dsylva-tech.ca

          Comment

          • ForcedFirebird
            R3V OG
            • Feb 2007
            • 8300

            #20
            Originally posted by MarkD
            I have also used TunerPro and Moates hardware for years, just not on the S54.

            And the Moates emulator sure beats the one I bought about 12 years back from Racelogic in the UK, that one was over $4000 by the time I got it into Canada
            Yeah, I hear you. Electronics pricing has plummeted.

            You may remember me, we had a long conversation on the phone, I'm in S.Florida. You gave me some direction on the hardware needed as we want to be able to do OBDII tuning in-house for our projects.
            john@m20guru.com
            Links:
            Transaction feedback: Here, here and here. Thanks :D

            Comment

            • MarkD
              Forum Sponsor
              • Sep 2004
              • 486

              #21
              Originally posted by ForcedFirebird
              Yeah, I hear you. Electronics pricing has plummeted.

              You may remember me, we had a long conversation on the phone, I'm in S.Florida. You gave me some direction on the hardware needed as we want to be able to do OBDII tuning in-house for our projects.
              Yes I remember you. In this case, the drop is not so much because electronics prices in general have dropped, it's because Racelogic was selling a product that very few other companies made at that time. The actual cost to produce that emulator could not have been more than 400 or $500 but they didn't sell many so had to recover the development costs over a small number of sales.
              URL: www.dsylva-tech.ca

              Comment

              • ForcedFirebird
                R3V OG
                • Feb 2007
                • 8300

                #22
                Right. Kind of like the Lisa desktop when I was in school. As a whole, electronics and parts have gone down in price because of other advancements such as smaller and easier to produce components.

                Either way, we have a potential s54 swap coming in the shop and will be contacting you :)
                john@m20guru.com
                Links:
                Transaction feedback: Here, here and here. Thanks :D

                Comment

                • Todd Black 88
                  No R3VLimiter
                  • Oct 2007
                  • 3449

                  #23
                  So, this is another option for e30 folks swapping s54s into gods chassis then?
                  No need to ship to Europe for removing all the unnecessary stuff?
                  Originally posted by codyep3
                  I hope to Christ you have looks going for you, because you sure as fuck don't have any intelligence.
                  2001 silver/Blk 325 cabby. SOLD
                  1988 Blk/Blk e30 factory wide body kit car SOLD
                  1992 DS/BLK 325 m-tech II apperance pack cabby SOLD!
                  2002 325xit Sil/blk. SOLD
                  2012 328i xdrive touring. Wht/blk. SOLD
                  2009 135 cabby. monacoblue/blk leather SOLD
                  2007 Z4m coupe. Silver grey/black/ aluminum. 1of50
                  2010 F650gs twin
                  2016 M235i cabby. Mineral grey/Red leather

                  Comment

                  • thedean
                    Wrencher
                    • Sep 2010
                    • 262

                    #24
                    Will Alpha-N be an option with this tuning?

                    What about MAF swaps(for FI-applications)? Any idea of what kg-hour the stock s54 MAF pings at?

                    $1800 still seems a bit steep considering you can get a DTA S80 running for about the same cost w/ base maps.

                    Will advice for datalogging hardware/software be given along with how to intergrate that with the tunerpro interface, such as part throttle map tuning?

                    I am glad you are using tunerpro though, I have been debating the s54 swap for awhile but wanted to use tunerpro. I have been using tunerpro w/ the 413 for about a year and have had great results thus far.

                    Comment

                    • MarkD
                      Forum Sponsor
                      • Sep 2004
                      • 486

                      #25
                      Originally posted by Todd Black 88
                      So, this is another option for e30 folks swapping s54s into gods chassis then?
                      No need to ship to Europe for removing all the unnecessary stuff?
                      Sorry I just saw this today! Yes I am doing it all in Canada, no need to ship to Europe. I can easily set up my chip shipper so he can flash the DME's in Columbus Ohio, so it won't even need to come across the border.
                      URL: www.dsylva-tech.ca

                      Comment

                      • MarkD
                        Forum Sponsor
                        • Sep 2004
                        • 486

                        #26
                        Originally posted by thedean
                        Will Alpha-N be an option with this tuning?

                        What about MAF swaps(for FI-applications)? Any idea of what kg-hour the stock s54 MAF pings at?

                        $1800 still seems a bit steep considering you can get a DTA S80 running for about the same cost w/ base maps.

                        Will advice for datalogging hardware/software be given along with how to intergrate that with the tunerpro interface, such as part throttle map tuning?

                        I am glad you are using tunerpro though, I have been debating the s54 swap for awhile but wanted to use tunerpro. I have been using tunerpro w/ the 413 for about a year and have had great results thus far.

                        I can make alpha-N tunes but have not been promoting them as unless a car has exactly the same intake system as the one I develop the tune for, it will need some data logging and custom tuning. Right now I am only offering that for track cars in the Toronto area.
                        URL: www.dsylva-tech.ca

                        Comment

                        Working...