CEL is triggered via CAN, so you need to wire up the CAN adapter.
Announcement
Collapse
No announcement yet.
E30 S54 Swap AC signal input to DME
Collapse
X
-
Originally posted by R3Z3N View PostCEL is triggered via CAN, so you need to wire up the CAN adapter.
Comment
-
For future reference on the Gen 1 board here is a complete wiring so that the DME controls the aux fan fully based on Temp, A/C pressure, Speed etc:\
Last edited by R3Z3N; 02-11-2019, 08:59 PM.
Comment
-
I sold one of Garry's CAN controllers to someone who hasn't been able to get the A/C compressor to turn on. He says he has everything connected properly and Garry has even replaced the CAN controller for him and it's still not working for him. He says he's receiving the following error: "DME signal error CAN bus instrument cluster"
I'm not sure exactly how the controller functions. I just do the wiring and offer the controller as a courtesy with my harnesses. Does anyone have any ideas as to what the issue could be? His car is a 1999 M3 with an M54 swap.
Comment
-
Originally posted by Andrew325is View PostHe says he's receiving the following error: "DME signal error CAN bus instrument cluster"
He is in touch with me to sort things out.
Comment
-
Originally posted by Andrew325is View Post... He says he's receiving the following error: "DME signal error CAN bus instrument cluster"...
Comment
-
Originally posted by R3Z3N View PostFYI, the files I gave you have a subcategory in the DTC XDFs for DTCs to suppress, so that you can do that with your EWS delete. I am willing to walk through the usage with you remotely.
Comment
-
Originally posted by R3Z3N View PostFYI, the files I gave you have a subcategory in the DTC XDFs for DTCs to suppress, so that you can do that with your EWS delete. I am willing to walk through the usage with you remotely.
Comment
-
Originally posted by RBrom84 View PostDoes anyone have the wiring diagram/ pinout for the gen 2 module e36 with s54 ecu? thanks.
Comment
Comment