iX wheel thread

[nando]

it's likely, yes.

if you really don't want to roll them, stick with 205/50s and a 10mm spacer.

[325ix]

Cool thanks. I have one more question. Would a 15x7 et 10 work with 205/50/15 tires? I'm new to wheels and what fits so I really have no idea how to know. Thanks again for answering all my questions. :mrgreen:

[nando]

no that won't even fit

on a 7" wide wheel at ET24 you would need to roll the fenders, at ET10 you'd be sticking out ~10mm past the flares..

[325ix]

Could the flares be rolled 10mm to make them fit?

[jmenacker]

O.Z. Graphite Chrono 16x7 et37

These were replacements for a set of Mille Miglia MM-II's that were "permanently" borrowed. These have a harder look and are not as easy to clean. On the good side they are lighter than the MM's and haven't been curbed - yet. Available at Tire Rack for $200 a pop. S-Drive tires are excellent!

Joe M in WV

[88e30ix]

16x7.5 et20 and 16x9 et15. 205/45/16 all around. Rear plastics arches are trimmed underneath and fenders rolled. Fronts clear fine. H&R sports/Koni adjustables.

Where did you get those Koni capable of being adjusted?

[nando]

the only konis they sell for the ix are single (rebound) adjustable

[88e30ix]

the only konis they sell for the ix are single (rebound) adjustable

Sorry for the noob questions but if I do get the Konis my IX would look like that?

[Stevo-iX]

By look like that do you mean height?
Then no, you would need some different springs for that. Shocks just control dampening.

[88e30ix]

By look like that do you mean height?
Then no, you would need some different springs for that. Shocks just control dampening.

H&R sport?

[kid325e]

Two240s iX has the SICKEST fitment/wheel choice i've seen recently. Props!

Carry on.

[ihavefingers]

I have a chance to buy some awesome wheels in et19, they are 14x7. would these fit without a ton of work? and anyone know of any good tires in 205 50-60 14? they make some legit tires in 195, but id like the extra width.

[nando]

not really any good tires in 205/60-14

ET19 is also quite a bit too low. you could probably get away with a 195/60-14 with that offset and width, but that will still be a bit tight in the rear.

[mbulsa]

16x7.5 et20 and 16x9 et15. 205/45/16 all around. Rear plastics arches are trimmed underneath and fenders rolled. Fronts clear fine. H&R sports/Koni adjustables.

what lip is that?

[Erik j]

Ronal Turbos running snow tires

ITP running ATV mud tires