Originally posted by nando
View Post
Announcement
Collapse
No announcement yet.
iX wheel thread
Collapse
X
-
185? Those are really small - almost and an inch narrower and half an inch smaller than stock.
Leave a comment:
-
-
Originally posted by SeattleE30///M3 View PostHi - Will 15x6 et36 fit on the 325ix? Will it require spacers?
Thanks in advance!
Leave a comment:
-
Winter wheel size help
Hi - Will 15x6 et36 fit on the 325ix? Will it require spacers?
Thanks in advance!
Leave a comment:
-
Originally posted by ziazhp View PostThink I finally found some...
16x7, ET 28. These should work, right?
Leave a comment:
-
Originally posted by B0RN318 View PostHas anyone squeezed a 16x8 et26 with a 205/45/16 under rolled flares?
I have a set of style fives waiting to be filled and drilled for my ix����
Also I agree, we should I've the sizing chart up there sticky'd in the first post, I think would answer lots of questions before they're asked
Leave a comment:
-
Has anyone squeezed a 16x8 et26 with a 205/45/16 under rolled flares?
I have a set of style fives waiting to be filled and drilled for my ix
Leave a comment:
-
Think I finally found some...
16x7, ET 28. These should work, right?
Leave a comment:
-
Those definitely will not fit. I mean, they will physically "fit" on the car but not in the way you are probably intending. ;)
Leave a comment:
-
Originally posted by ziazhp View PostSaw these BBS RS knockoffs on ECS, they say they will fit, but it sounds like from Nando's experience they won't?
16" F01 - Set Of Four
16"x8" ET25 4x100/4x114.3 - Silver/Polished Lip
https://www.ecstuning.com/b-f1r-whee...r/f01168s25kt/
Leave a comment:
-
Saw these BBS RS knockoffs on ECS, they say they will fit, but it sounds like from Nando's experience they won't?
16" F01 - Set Of Four
16"x8" ET25 4x100/4x114.3 - Silver/Polished Lip
Leave a comment:
-
Originally posted by nando View PostBasically, it depends on the barrels and lips, and what the actual offset of the wheels are. Super low offset wheels (typically fit to RWD E30s) are not going to work.
Generally, depending on tire size of course:
7" wheels - ET25-ET40 (ET25 is pushing it)
7.5" wheels - ET30-ET35
8" wheels - ET30 (+/-2mm or so - they are a tight fit).
9" wheels are never going to fit an ix properly (that is, not stick out 1" past the fenders), unless you do stupid things with "stance" and camber and undersized tires. Thankfully that seems to have finally died out a bit..
That's not how it works. the stock wheel offset is based on stock wheel width, stock tire size, stock suspension, and leaves a ton of room to go wider (I run a 15mm spacer on my stock wheels because otherwise it looks stupid when lowered). Also, if you were to stick with the stock ET41 offset for say, a 8" wide wheel, it wouldn't fit because it would rub the struts and probably rub on the inside in the back as well.
It also depends on the tires, as wider tires obviously have less clearance. FWIW, I've run super wide tires in the past, but I recommend either a 205 or a 225 if it's a street car (realistically, even a 225 is as far as I'd go for a "track" car, not that there are a lot of ix track cars).
This captures everything well. Maybe this should be a sticky as to the best sizes for each diameter? Do we have a chart we can put at the beginning of the thread so everyone has a rough idea of what will fit?
Leave a comment:
-
maybe, but probably not. The front wheels would have to stick way out, and they will still rub in a lot of places, especially if you're running wide, sticky tires. It would probably work though with M3 fenders.
Leave a comment:
Leave a comment: