5 lug pattern to ix?

[jute91]

Hey does anybody have experience of this? im wondering if i could use e46 330xi hubs at front?

[nando]

there are a few hubs that will work but the problem is always going to be brakes. You'll need custom something somwhere.

IMO, unless you really want a specific 5-lug wheel, it's not worth it. you could spend that money on a BBK that weighs a heck of a lot less than any OEM 5-lug brakes do.

[jute91]

Here's what i planned first..

Toyota hj61 front disc with billet center... Im still wondering if i just replace old bolt plate with new one... welding it together, but i think its to risky... now when i can, i might do billet hub instead :)

[Northern]

there's the setup with the 1series hubs/e46 330 rotors and e32 calipers, not sure if you need the front or rears though

[jute91]

I readed about it on finnish forum. e87 116ti rear hubs would fit to front
of ix, but they come 9mm outer... using e30 325i rear hubs on the rear would lower offset 15mm= more lip to wheels! 8)

Need to find out that e87 hub, if there is possible to machine them to same offset with e30 ix

is there shop that makes 5 lug pattern for e30 325i? so the offset would remain?