Cop or Not - Unique ebay IX

[CorvallisBMW]

I really like the car from the outside, wheels and all. I'd loose the woodgrain covers, but other than that it's fine. Manual swap it though.

[fight4life28]

Yeah I like the outside of the car, Inside looks like there too much going on for my taste, and auto=(

[ThatOneEuroE30]

Looks like a good looking car to me.

[The Dark Side of Will]

Extra marker lights in the top of the headlights? Is that a weird Euro option?

[nomansland92]

Extra marker lights in the top of the headlights? Is that a weird Euro option?

Ya the euro smilies have that extra marker light

[The Dark Side of Will]

Interesting.

[TimeMachinE30]

That corny aftermarket radio and autozone green rocker switch are killing it for me.

[Mlarsen]

10k and reserve not met? Lol. Time to sell my iX I guess.

[downforce22]

Ya the euro smilies have that extra marker light

I just put those on my car but the bulbs were burnt out. I went to the auto store, grabbed 2 5 W rated to 13.5V bulbs and they dont work.

I checked and I have 12.1 V signal from the multimeter in the connector. Do you know what bulbs are supposed to take in the euro smiley parking lights?

[nomansland92]

I just put those on my car but the bulbs were burnt out. I went to the auto store, grabbed 2 5 W rated to 13.5V bulbs and they dont work.

I checked and I have 12.1 V signal from the multimeter in the connector. Do you know what bulbs are supposed to take in the euro smiley parking lights?

I replaced mine,I think they were just normal bulbs you can get anywhere. Check your pins in the socket, make sure there's no corrosion and make sure there getting a good connection

[Kershaw]

I just put those on my car but the bulbs were burnt out. I went to the auto store, grabbed 2 5 W rated to 13.5V bulbs and they dont work.

I checked and I have 12.1 V signal from the multimeter in the connector. Do you know what bulbs are supposed to take in the euro smiley parking lights?

In the connector to the high beams or the euro city light connector? Because it is different and you have to run a new wire to the fuse box and then out to the city lights.

[KIRIEIW]

"full restoration" but couldn't get the steering column covers strait with no gaps

[CorvallisBMW]

In the connector to the high beams or the euro city light connector? Because it is different and you have to run a new wire to the fuse box and then out to the city lights.

Or you can tap in to your side marker lights. That's what I did.

[Kershaw]

I haven't ever cared to connect mine, but that's a solid idea.

[downforce22]

In the connector to the high beams or the euro city light connector? Because it is different and you have to run a new wire to the fuse box and then out to the city lights.

The euro city light connector. My car is a euro (euro bumpers) which was federalized with side markers so I will be replacing the fenders with US ones without the federalized side markers.

I was planning to not run side markers on the front and just tap the euro city lights from the existing sidemarker wiring. Thats where I have the 12.1v signal. Maybe i just need to adjust the connector pin to be a tighter fit on the bulb??

Its a bulb like this