Big Brakes and iX Weaves?

[flyboyx]

i had a set of ireland engineering fronts. they were great, but i decided to go 5 lug so they were sold.


i'm gonna just leave this here lol.

https://houston.craigslist.org/pts/5461543567.html

[EyExR]

The only "thing"that maybe could work is the smaller kit. 280x22mm Corrado rotors and Wilwood Dynapro calipers.

Check that fitment template - http://massivebrakes.com/profiles/Pr...ont_280x22.pdf

Print and test against your wheel

Thanks!!

[nando]

Lee,

is it possible to make a deeper rear ebrake drum or some sort of spacer so the rear kit could be used with stock ix rear hubs?

[Massive Lee]

Well, you'd need to make the whole hat deeper and keep using the regular e30 handbrake drums. If you have an iX rear disc, can you measure the depth of the disc? From mounting face (the face that mates to the hub) to back of the disc.

Lee

[nando]

I think you're right, because the caliper bolts to the same place on the trailing arm.

I don't have one laying around. I'd have to pull one and measure it. If I get to it I'll post it in here.

[Nisse Järnet]

Well, you'd need to make the whole hat deeper and keep using the regular e30 handbrake drums. If you have an iX rear disc, can you measure the depth of the disc? From mounting face (the face that mates to the hub) to back of the disc.

Lee

[nando]

Nisse to the rescue!

[Nisse Järnet]

Haha yeah :)

[Massive Lee]

The iX rotor is 10mm deeper than a standard e30 rotor

Lee