iX rear sway same as normal e30?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BimmerScreamer
    E30 Addict
    • Dec 2008
    • 413

    #1

    iX rear sway same as normal e30?

    So I'm looking to put a bigger rear sway in my iX and I'm wondering if it has to be iX specific?
    Anything can be done
  • dr.strangelove
    E30 Modder
    • Jan 2005
    • 847

    #2
    rear, no.

    front, yes.

    Comment

    • BimmerScreamer
      E30 Addict
      • Dec 2008
      • 413

      #3
      thanks
      Anything can be done

      Comment

      • nando
        Moderator
        • Nov 2003
        • 34827

        #4
        Originally posted by dr.strangelove
        rear, no.

        front, yes.
        you have it backwards

        rear is the same as the stock E30 M3

        front is unique - there is no aftermarket.
        Build thread

        Bimmerlabs

        Comment

        • BimmerScreamer
          E30 Addict
          • Dec 2008
          • 413

          #5
          so if I want to upgrade mine do I need to get one that says its for a normal e30 or m3, none say they will work on the iX but is the rear of the iX all the same as other e30's?
          Anything can be done

          Comment

          • nando
            Moderator
            • Nov 2003
            • 34827

            #6
            yes, you can use any E30 rear swaybar on your ix.

            I'd probably go for an H&R 18mm or ST 19mm. avoid anything too big (like the IE 22mm) since you have to leave the front stock.
            Build thread

            Bimmerlabs

            Comment

            • ShowStopper
              E30 Mastermind
              • Jan 2008
              • 1845

              #7
              ix and m3 rear sways are the same size

              all other e30s are smaller

              Comment

              • BimmerScreamer
                E30 Addict
                • Dec 2008
                • 413

                #8
                Originally posted by nando
                yes, you can use any E30 rear swaybar on your ix.

                I'd probably go for an H&R 18mm or ST 19mm. avoid anything too big (like the IE 22mm) since you have to leave the front stock.

                what is the ST 19?, whats the problem with the 22?

                my last mini handled like an animal and had a 25.5mm rear and factory front among other things (not sure how much of that carries over to an awd)
                Anything can be done

                Comment

                • nando
                  Moderator
                  • Nov 2003
                  • 34827

                  #9
                  22mm is too big. it's going to make the car very tail happy, especially in the wet/snow.

                  ST is Suspension Techniques
                  Build thread

                  Bimmerlabs

                  Comment

                  • Alkasquawlik
                    R3V Elite
                    • Feb 2008
                    • 4557

                    #10
                    bumping this from the dead, what is the advantages of having an aftermarket rear sway? improving chassis rigidity?

                    SC*AR

                    Originally posted by JamesE30
                    And with a car looking like yours I imagine the balance shall tip in the favor of insult, like a big fat fucking retarded fucking black girl on a see-saw, opposite... a dwarf.

                    Comment

                    • nando
                      Moderator
                      • Nov 2003
                      • 34827

                      #11
                      less roll, less understeer/more oversteer.
                      Build thread

                      Bimmerlabs

                      Comment

                      • Alkasquawlik
                        R3V Elite
                        • Feb 2008
                        • 4557

                        #12
                        Originally posted by nando
                        less roll, less understeer/more oversteer.
                        Are you running one in your car? And if you are, what kind?

                        SC*AR

                        Originally posted by JamesE30
                        And with a car looking like yours I imagine the balance shall tip in the favor of insult, like a big fat fucking retarded fucking black girl on a see-saw, opposite... a dwarf.

                        Comment

                        • nando
                          Moderator
                          • Nov 2003
                          • 34827

                          #13
                          no, mine are stock. I never really felt like it was something I needed to upgrade.
                          Build thread

                          Bimmerlabs

                          Comment

                          Working...