Mtech 2 valence on plastic bumper early model

[Wishno87]

i am still collecting parts at the moment but am ready to buy the rear apron. just wanted to know how this will all go together before i dish out the moniez. Where would be the best place to get the rear apron? the replicas are about 200 right?

[Wishno87]

let the fun begin aka flaming about fake tech2 bits.

meh i dont think the rear apron is available new from the dealer without getting the whole rear end because its one piece. i would have to get the apron and the bumper together. but then i would have to get the front bumper to match the rear bumper. then i would have to get the front valence so the front bumper dosent look silly. next thing i know im selling my left nut for a full tech 2 kit:tsk:

[twothrees]

i am still collecting parts at the moment but am ready to buy the rear apron. just wanted to know how this will all go together before i dish out the moniez. Where would be the best place to get the rear apron? the replicas are about 200 right?

I got mine from eurostyle. Go to maxbimmer.com and he advertises there. Plastic bumpers and a rear apron is going to be a lot cheaper than a real mtech kit. If you can find one.

[Wishno87]

I got mine from eurostyle. Go to maxbimmer.com and he advertises there. Plastic bumpers and a rear apron is going to be a lot cheaper than a real mtech kit. If you can find one.

how much did yours cost? he dosent have a website posted

[Toms73NovaSS]

They are $200 Can. before shipping.

[rkettner]

i used stainless short screws to connect my fibreglass valance to the plastic rear bumper on my 87 cabrio. the fitment of the one from california annoyed me but with trimming it fit.

[Wishno87]

They are $200 Can. before shipping.

thanks, i see you need one as well;)

[Wishno87]

i used stainless short screws to connect my fibreglass valance to the plastic rear bumper on my 87 cabrio. the fitment of the one from california annoyed me but with trimming it fit.

your in vancouver bc arnt you?:(

[smonkbmw]

so, youre doing a tech 2 front and rear valance set up but not the side panels?

[Wishno87]

so, youre doing a tech 2 front and rear valance set up but not the side panels?

jeff it was a joke. i was just making the point that the non fake mt2 rear apron isint available seperate from the rear bumper so i would have to get a replica unless i was going to get the full kit

[Toms73NovaSS]

thanks, i see you need one as well;)

Actually mine is mounted and I am working on my side skirts (e36 non twist style). Pictures after everything is painted.

[smonkbmw]

jeff it was a joke. i was just making the point that the non fake mt2 rear apron isint available seperate from the rear bumper so i would have to get a replica unless i was going to get the full kit

so thats not answering my basic question. are you planning on getting the tech2 side panels/pods also, or just running front and rear valances.

[BBY1104]

Just the rear apron!

Facelift Valance no mt2 pods ir front at all.

[fporro]

i think fporro did this too but all the pictures are dead

;)

I used a Racing Dynamics apron, bolted to bottom of bumper.

As far as plastic sliders/brackets, mountem to bumper, mock it up and eye where to drill 1/4 panel.
Bracket alouds adjustments and hole willbe hidden by bumper. so is all good.

Visualise it ... factory brackets mount first, then bumper slides onto them., backward mock will work for placing.

[BBY1104]

/\ are those stock weaves??