How to fab a mono wiper?

[trent]

it isn't that hard..you are lazy.



ban

[O 16581 72452 5]

it isn't that hard..you are lazy.



ban

I was reading it takes 3 hours to get it out of there. =\

[Dave]

it isn't that hard..you are lazy.



ban

Indeed. My car came to me with the park wrong and the wiper stopped in the up position.

Took maybe 10 minutes to fix it. You dont need to remove the linkage. Disconnect the linkage where it connects to the motor. Move arms to where you want them parked. Connect linkage.

Bam.

Done.

[trent]

i did it in about 4, including destroying my heater fan that I had to go back and redo....your point?

[trent]

Indeed. My car came to me with the park wrong and the wiper stopped in the up position.

Took maybe 10 minutes to fix it. You dont need to remove the linkage. Disconnect the linkage where it connects to the motor. Move arms to where you want them parked. Connect linkage.

Bam.

Done.

that shouldn't work? by my tests the park is set by the three holes at the end, on the passenger side. The linkage sets the park, not the motor.

[Dave]

Worked for me. I disconnected it and then moved the arms to the proper down position and then set it.

[trent]

which linkage did you disconnect...the linkage AT the motor (the single 10mm) or the actual linkage arm that conects to the driver side?

[O 16581 72452 5]

i did it in about 4, including destroying my heater fan that I had to go back and redo....your point?

That is my point, i'm in no hurry to deal with breaking shit.

[trent]

if you do it right you won't break things..i was just drunk.

[Dave]

which linkage did you disconnect...the linkage AT the motor (the single 10mm) or the actual linkage arm that conects to the driver side?

I loosened #8 on the diagram Rocla hotlinked. AT the motor.

[trent]

I loosened #8 on the diagram Rocla hotlinked. AT the motor.

you are right, i misunderstood you. I am the blatant asshole on this thread.

[Dave]

on this thread?

[NC325iC]

Hi-oh

[cthulu703]

on this thread?

That's an oh snap worthy comment.

[trent]

on this thread?

well, most of them. :)