Does momo make a hub that fits a airbag car?

[Brezzi]

Just installed my new wheel with hub and it sticks out crazy far, like more than the mtech 1 that I had on there originally. Does anybody know???

Thanks.

[MR 325]

The E30 Momo hub fits airbag and non-airbag cars. Sounds like you did something wrong?!

[Brezzi]

I don't think I did I'll post pics once I get home.

[Brezzi]

Like the spline is the right diameter and pattern but the hub itself is doesnt cover the gap between the wheel and the column.

[jrobie79]

I have a momo hub with momo race wheel in my 318is. No problems

[BraveUlysses]

What is the part number of the hub?

[Brezzi]

Not sure of the part number because I bought it second hand. heres what it looks like installed:

[MR 325]

Either you have your spacers/washers installed incorrectly or you have the wrong part.

The E30 Momo hub 100% fits all years, I've had a few.

[Jalves619]

This may be stupid, but have you put the key in and released the steering column lock? I've personally put a momo hub on a airbag column and had no issue.

[Brezzi]

This may be stupid, but have you put the key in and released the steering column lock? I've personally put a momo hub on a airbag column and had no issue.

yup done that, I took another look at it and bought another hub still won't go on completely. I have no idea why. When I bought the car it came with an mtech1 wheel and the PO had placed two spacers about an inch in length on the spindle. I tried putting it on with and with out these spacers and it sat at the same distance away from the column both times.

I'm pretty confused over here.

[Brezzi]

What is the part number of the hub?

the new hub I bought clearly has k2006 stamped into it.

[K1CKBAC]

What is that silver block..

[IRON-E]

More pictures dude, take off the hub and show us the bare steering column top.
I've never had any issues, with MOMO hubs either, that is just strange..

[Brezzi]

I took some pics, came out kinda shitty. I'll try and get some with a camera later.

[reelizmpro]

spacers are on the wrong side? when installing a wheel on an airbag car the spacers go on the outside right behind the nut/washer to take up the extra space.