Unfortunately I have taken both seats apart, but know what bar you’re talking about and know how everything went together. I tried to get the hog rings on there but absolutely could not, which I believe is because my hog ring pliers are really bad, do NOT get harbor freight ones for this job. I may just staple these flaps down, we’ll see.
I was following a video posted earlier in the thread and he uses fabric adhesive to fold the edges in around the center foam pieces, but the stapler will probably work better for all my problems, I’ll look into one of those.
In the video the guy also uses hog rings and not string to secure the leather to the divots. The string idea is much better, and that’s what was used from factory it appears. I’ll give that a go today, thanks for all the help.
I was following a video posted earlier in the thread and he uses fabric adhesive to fold the edges in around the center foam pieces, but the stapler will probably work better for all my problems, I’ll look into one of those.
In the video the guy also uses hog rings and not string to secure the leather to the divots. The string idea is much better, and that’s what was used from factory it appears. I’ll give that a go today, thanks for all the help.
Comment