Steering Wheel Garage: All things steering wheels

[Erik j]

Yea, mine has nothing listed on it other than Alpina and Momo on the front. next time I have the wheel off I will check to see if there is something near the center.

[John in VA]

Usually the size, style, or date of manufacture is engraved on the back of the lower right spoke. At least this is true of the 3 four-spokers I just checked.

[Erik j]

Just checked again, no numbers on the back. Unless they are under the hub.

[Nicademus]

It does have numbers on the back because I have the same wheel. When looking at the back it will be on the upper left spoke (so looking from the front the upper right). Mine says:

Momo
Made in Italy
TYP A38
KBA 70001 :D

[Erik j]

Alright, no numbers on the back of it

[Erik j]

I have the center pad, its sitting in my tool box. The only thing it was mission is the Alpina badge for the center.

I will go get the numbers brb

[Nicademus]

My Alpina Momo Wheel.. $7.00 at the junk yard :)

Can you tell me what numbers are on the back of it? Too bad its missing the center pad.

[Erik j]

My Alpina Momo Wheel.. $7.00 at the junk yard :)

[Nicademus]

Yes you can. I saw them somewhere but I have no idea. Check eBaymotors and eBay.de

[Kwaaahhh]

I was wondering do you guys know if you can buy the //m sticker for a mtech 2 wheel? Mine fell off. Thanks!

[Nicademus]

Hartge Wheel in a Hartge H27 (don't know why it won't post the right size?)

[Kwaaahhh]

I was wondering do you guys know if you can buy the //m sticker for a mtech 2 wheel? Mine fell off. Thanks!

[Eric]

Don't want to clog the thread, but I suppose hub/adapter/ quick release info is important here too.

Can you see the gauges with a 265mm wheel? Stock seats? How tall? I suppose the quick release and adapter bring it closer, which I imagine helps.

What quick release is that?

Well, yes i can, but nothing in my interior is factory besides the pedals.

in fact all that's in it at the moment is some wires and a stearing colum.

but....

the colum is lowered 50mm where it bolts to the firewall support.

I'm running a recaro pole position SPG bolted to the floor (my shoulder is below the door line)

my dash is lowered/tilted for better visibility.

I can do this becuase i'm running nothing under the dash besides the ECU, and that might change soon as well (no hvac, radio, center console etc)

[e28forlife]

here's my wheel for the 325

Don't want to clog the thread, but I suppose hub/adapter/ quick release info is important here too.

Can you see the gauges with a 265mm wheel? Stock seats? How tall? I suppose the quick release and adapter bring it closer, which I imagine helps.

What quick release is that?

[BUDNUNTA]

MOMO Mod 7