Steering Wheel Garage: All things steering wheels

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jand3rson
    replied
    Originally posted by Janderson
    I just realized I hadn't yet posted the new wheel I just got. Nardi Deep Corn, perforated leather with red stitching, traded it straight up for my M-Tech II:

    Small update to this, I just got a Momo E30 hub for $25 tonight. Just need to get a Momo-to-Nardi adaptor ring, and I can install it!

    Leave a comment:


  • Mike
    replied
    Originally posted by Holland


    ACS wood wheel, the only one I've seen. Don't really know much about it.
    That's hot, I must let you guys see my woody wheel shortly....I will post mine soon...

    Leave a comment:


  • Cha Ching
    replied
    OK, quick update - I managed to get the wheel back together with a new horn "retaining ring" which is what is pictured in my previous post. The coiled wire with the ghetto'd ground wire attached to it actually belongs inside the horn button. I had to take that sucker apart & put it back where it belongs.

    That & the retaining ring brought everything together. I haven't put it on the car yet, but I will attempt that this weekend. I'm only confused about where do I ground the horn button itself?

    Oh well, I will keep you informed...

    Leave a comment:


  • Jparkr
    replied
    my momo



    My blackline

    Leave a comment:


  • Cha Ching
    replied
    Originally posted by Nicademus
    I didn't know your were missing the horn ring. That is your problem right there. Let me see if I have an extra one.
    Hey, I didn't know I was missing a horn ring either! :o I found 1 on eBay for under $10 shipped, but Momo USA put me in touch with a retail distributor here in Orange County & the guy is just going to give me one...I think. I'll let you know tomorrow.

    Leave a comment:


  • Nicademus
    replied
    I didn't know your were missing the horn ring. That is your problem right there. Let me see if I have an extra one.

    Leave a comment:


  • Cha Ching
    replied
    **UPDATE: OK, I just got off the fone with Momo USA & from my discussion with the sales rep, it appears that the "retaining ring" shown in the photos above is a big part of the missing puzzle. There is a guy on eBay selling them so I may order from him. But I think that is going to make everything come together. I'll keep you informed...

    Leave a comment:


  • Cha Ching
    replied
    Originally posted by Nicademus
    Are you smoking a cigar? Honestly I have no idea what is going on in you pictures. I'll try to get some pics for you. Don't be afraid to keep on me about it.
    Yeah, I love smoking cigars. That's a Bolivar belicoso fino from Habana (sshhhh, don't tell the ATF!) . It's probably the only vice I have after trying to put messed up steering wheels back together.

    I appreciate the candor & will definitely stay on you to get some pics! :hitler:

    I just saw my wheel (w/a Momo horn button) come up for sale on eBay & he has a picture of the wiring, but it is really small & I don't think he has a hub for it. I asked for larger resolution fotos, but no reply yet.

    I think I may need "horn ring" which attaches between the hub & the wheel and has a spade connector for ground. It looks like this: (do you have one on yours?)

    Leave a comment:


  • Nicademus
    replied
    Are you smoking a cigar? Honestly I have no idea what is going on in you pictures. I'll try to get some pics for you. Don't be afraid to keep on me about it.

    Leave a comment:


  • John in VA
    replied
    Here's a 330mm Personal FS on the E28 forum:


    Leave a comment:


  • Cha Ching
    replied
    Originally posted by Nicademus
    Springs!?? WTF? Umm well the thing is I don't have mine wired up right either. Only the thumb buttons work, but the center button does not. I'll take a look. Plus my horn is broken or going out. It barely makes a sound. Sounds like the buzzer from "Operation".
    LOL @ "operation"! Not really springs, more like a coiled copper wire which, I believe, is supposed to act as a grounding wire.

    There is also a small rounded wire, which should act like a "C" clip to hold the horn button in place (or so I think). Here's a pic:



    This is what I started with:



    Which somehow became this (after I dropped the crash pad & wheel while taking it apart):

    Leave a comment:


  • Nicademus
    replied
    Originally posted by Cha Ching
    Nic, are you ever going to post a pic of your other wheel showing me the wiring for the horns? My crash pad fell came off & some of the springs went flying & I don't know how to put them back correctly. Help me out, you're the only one I know that has the same wheel. ;)
    Springs!?? WTF? Umm well the thing is I don't have mine wired up right either. Only the thumb buttons work, but the center button does not. I'll take a look. Plus my horn is broken or going out. It barely makes a sound. Sounds like the buzzer from "Operation".

    Leave a comment:


  • Cha Ching
    replied
    Nic, are you ever going to post a pic of your other wheel showing me the wiring for the horns? My crash pad fell came off & some of the springs went flying & I don't know how to put them back correctly. Help me out, you're the only one I know that has the same wheel. ;)

    Leave a comment:


  • Nicademus
    replied
    I wanted this wheel but missed the auction :(

    Leave a comment:


  • Cha Ching
    replied
    Originally posted by alexd
    Suede Sparco

    AlexD, sweet interior! Recaro SRD's? What sort of brackets did you use for your seats?

    Leave a comment:

Working...