What HID Brand Are You Using?

[parkerbink]

Osram Xenarc 4300k running on Hella ballasts from a Volvo, in Smiley work great!

I just got back from a 1400 mile road trip and the lights were amazing! More astounding is that I did not get a single "false" bright flash which I got all the time with the Osram Supers. (people brighting when your brights are not on)

[MR 325]

Here's a pic of mine not that it really shows much

I have yellow Nokya bulbs in my fogs

[Ryan Stewart]

Polarion 4300 kit with Phillips bulbs and ballasts based to go directly into the H1 base on my Euro ellips. Quality is top-knotch and even a Canadian could install them.

The dark is my bitch:

http://imageevent.com/rstewart/light

[Spaz]

Polarion 4300 kit with Phillips bulbs and ballasts based to go directly into the H1 base on my Euro ellips. Quality is top-knotch and even a Canadian could install them.

The dark is my bitch:
http://imageevent.com/rstewart/light

oww u bastage.

[bmwm3n528]

Dad's setup:



XTec 6000K Low

Quality unit, lifetime warranty.

[wastedincome]

i kinda want to get bi xenon projectors... anyone interested in a set of smoked euro lights with HID projectors retro'd?

SURE.....What kinda $$ are we talking??

[Ryan Stewart]

wow, I thought that was a pic of MY dads M3 until I saw the orange blinker.

[bmwm3n528]

wow, I thought that was a pic of MY dads M3 until I saw the orange blinker.

Is he rocking the ZKWs?

[Ryan Stewart]

fo sheezy, and an inferior kit to mine. The MrJung one. Still works the same but not built to the same quality. Being said they still work fine after a wreck that destroyed my old smoked Euros and the high beam bulbs.

[Addissimo]

I just got back from a 1400 mile road trip and the lights were amazing! More astounding is that I did not get a single "false" bright flash which I got all the time with the Osram Supers. (people brighting when your brights are not on)

thats because people are used to being blinded by xenons...

[m42technic]

Prolumen 6000k.



I like.

[92 mtechnic cabrio]

Prolumen 5000k, I modified the plastic caps so that the wires could run through it, and the kit came with these sweet wire grommets that worked perfect with the plastic cap.

I want 6000k or hotter, anyone wanna trade?

[Royal]

What would all would I need to convert my 90 cabrio with sealed beams to ellips with hid, also what gives a better light pattern with hids, us or euro ellips? Which heat is the brightest, I just want bright, not blue.

about how much $$$

[MR 325]

Prolumen 5000k, I modified the plastic caps so that the wires could run through it, and the kit came with these sweet wire grommets that worked perfect with the plastic cap.

I want 6000k or hotter, anyone wanna trade?

Didn't I tell you to get 6000? :)

Don't get anything higher than that though

[MR 325]

What would all would I need to convert my 90 cabrio with sealed beams to ellips with hid, also what gives a better light pattern with hids, us or euro ellips? Which heat is the brightest, I just want bright, not blue.

about how much $$$

You need a set of ellips and connectors and simple wiring skills. I just attached male spade connectors to the ellip wiring and plugged them in to the car's stock plugs. Then of course you'll need to install the HID's in the low beams, very easy job really. All in all you're looking at $100-$200 for ellips depending on what you buy and $200-$400 for an HID kit