In the immoral words of Mary Pong: "you don't got money, start steppin"
The idea here is to gauge how many 8" boxes I need to do as an initial run.
Please discuss your interest, ask questions, toss out ideas...but please, keep it to the 8" box ONLY.
The general idea of the box is from the left vertical brace to the far right side of your trunk. The goal is 15" tall, but only 2" depth at the top of the box, 8" at the bottom.
There will be a single 8" woofer and a single 3" port tube, both firing through and completely sealed to the ski pass hole. 100% of the bass will be in the cabin, no sound deadning of any kind will be needed.
There will be no rattles on a completely stock car, as usual in my designs.
The gross internal volume I am aiming for is .90 cubic foot, but I want to use big burly 8" woofers. I will be using the classic Fosgate Punch DVC as a model.
The box will be made from 5/8" MDF to shave a few pounds, but will have a single brace of MDF to control resonances in the front and rear panels.
My goal is under 25 pounds for box AND woofer, assuming an Infinity, Sony or Boston 8", none of which are as burly as my model.
The purely cosmetic amp rack should be no more than 5 pounds.
Part of the design will be easy removal for track cars. An optional amp rack will also be available.
These boxes will come fully upholstered in my "near perfect match" carpet. Due to the additional labor of upholstery and the additional materials, plus the undoubtedly smaller runs of these boxes, they will cost a bit more than the 10" boxes...but the final product is all about what R3V wants.
So...lets hear it!
Thanks again for all your continued support,
Luke Fisher
The idea here is to gauge how many 8" boxes I need to do as an initial run.
Please discuss your interest, ask questions, toss out ideas...but please, keep it to the 8" box ONLY.
The general idea of the box is from the left vertical brace to the far right side of your trunk. The goal is 15" tall, but only 2" depth at the top of the box, 8" at the bottom.
There will be a single 8" woofer and a single 3" port tube, both firing through and completely sealed to the ski pass hole. 100% of the bass will be in the cabin, no sound deadning of any kind will be needed.
There will be no rattles on a completely stock car, as usual in my designs.
The gross internal volume I am aiming for is .90 cubic foot, but I want to use big burly 8" woofers. I will be using the classic Fosgate Punch DVC as a model.
The box will be made from 5/8" MDF to shave a few pounds, but will have a single brace of MDF to control resonances in the front and rear panels.
My goal is under 25 pounds for box AND woofer, assuming an Infinity, Sony or Boston 8", none of which are as burly as my model.
The purely cosmetic amp rack should be no more than 5 pounds.
Part of the design will be easy removal for track cars. An optional amp rack will also be available.
These boxes will come fully upholstered in my "near perfect match" carpet. Due to the additional labor of upholstery and the additional materials, plus the undoubtedly smaller runs of these boxes, they will cost a bit more than the 10" boxes...but the final product is all about what R3V wants.
So...lets hear it!
Thanks again for all your continued support,
Luke Fisher
Comment