Do i HAVE to bypass stock amp?

[Gregs///M]

Ah, I must be thinking of E34 OEM amp's. Those have the built in 10 channel crossover networks.

So the OP's tasks would be to just hookup the OEM speakers using the OEM crossover connections at the speaker itself.

[bastianshaw]

can one of you CLEARLY tell me the best heading here?

i have 2 stock premium speakers 2 coaxes and 2 premium tweets

[Gregs///M]

Use the front two channels from your Alpine head unit to power the 2 stock mids and tweeters being sure to use the crossovers mounted to their magnets. Then use the rear two channels to power the coaxial speakers full range.

Would be easiest to buy and run new speaker wire into the kick panels and rear deck lid. Run wires down drivers side to avoid heavy gauge power cable to front.

[German Audio Specialties]

can one of you CLEARLY tell me the best heading here?

i have 2 stock premium speakers 2 coaxes and 2 premium tweets

Dude, you need to pick. I wrote a HUGE bypass thread, I cannot help you if you are unwilling to read it and follow along.

Would be easiest to buy and run new speaker wire into the kick panels and rear deck lid. Run wires down drivers side to avoid heavy gauge power cable to front.

All of these questions have been answered in the bypass thread.

Use the wiring at the amp to do the rears, run new wires to the fronts. The whole goddamn job takes 20 minutes if you don't fuck around posting on R3V.

Quit being worried about it, READ MY THREAD, and go get it done!

Luke

[bastianshaw]

Dude, you need to pick. I wrote a HUGE bypass thread, I cannot help you if you are unwilling to read it and follow along.

All of these questions have been answered in the bypass thread.

Use the wiring at the amp to do the rears, run new wires to the fronts. The whole goddamn job takes 20 minutes if you don't fuck around posting on R3V.

Quit being worried about it, READ MY THREAD, and go get it done!

Luke

The thread where in the beginning you have a disclaimer saying if I have a fader this might not work? That wasnt exactly confidence inspiring hence my post:-)

[Gregs///M]

The thread where in the beginning you have a disclaimer saying if I have a fader this might not work? That wasnt exactly confidence inspiring hence my post:-)

Agree. If you have more technical questions. Just PM me.

[German Audio Specialties]

The thread where in the beginning you have a disclaimer saying if I have a fader this might not work? That wasnt exactly confidence inspiring hence my post:-)

The fader cars are covered in depth by several people. Seriously, it is a 20 minute job. I will go edit that first post shortly to alleviate that issue, maybe even link to the other part that covers the "fader" cars.

[bernzpeed]

The fader cars are covered in depth by several people. Seriously, it is a 20 minute job. I will go edit that first post shortly to alleviate that issue, maybe even link to the other part that covers the "fader" cars.

With Luke's advice, I deleted the fader on mine and unwrapped the wire about 6-8" to reveal the grounds where I needed to connect. The fader is useless since the HU already have that feature.

The speakers crossover is already connected to the premium speaker so it is easy to wire in.

[bastianshaw]

With Luke's advice, I deleted the fader on mine and unwrapped the wire about 6-8" to reveal the grounds where I needed to connect. The fader is useless since the HU already have that feature.

The speakers crossover is already connected to the premium speaker so it is easy to wire in.

so you are still using the stock amp?

[greentalks43]

Check out this post, it should be what you need to know if you have the 6 wire fader http://www.r3vlimited.com/board/show...0&postcount=91