need to roll up windows but engine and wiring harness out

[JonsE30]

noob here, i am in the middle of rebuilding bottom to top and now that the engine/trans and wiring (c101) is all out. is there a way i can get power to the switches to roll up the windows?

[jeffnhiscars]

If there's a plastic plug on your door panels you can manually crank them up through that hole. You may need the plastic tool that's probably not in your tool kit

[iansane]

I had to do this recently and just grabbed the my cordless drill battery and jumped some wires from the switch.



Looks like this shows violet and black for the driver side and violet/gray and black/gray for the passenger. Just try any polarity and it if rolls up, cool. If not, swap polarity.

[Das Delfin]

https://www.r3vlimited.com/board/showthread.php?t=428800

[Gregs///M]

You can send 12 volts directly to the motors too. One polarity up and one down.