analog clock install

[Alecs MacDonald]

Just for clarification, if you have a two/six button obc, it uses the same cradle as the analog clock. If you have a 13 button obc you will need to purchase said bracket. I just followed this writeup and it is spot on.

[Jean]

If any of you need the correct harness for it let me know, I have a spare with long wires. $5 shipped and it's yours.

[Hellabad]

The analog clock bracket is part # 62-13-1-380-009. I got it from the dealer for $4.14, tax included.

Thanks to all of you very much.

Jay

[ScentOfGasoline]

Does anybody know if a 6 button obc has a bracket that will hook up to the analog clock?

yes, it has the same craddle/bracket the clock sits in

[twothrees]

The analog clock bracket is part # 62-13-1-380-009. I got it from the dealer for $4.14, tax included.

[SpartanTiger81]

Does anybody know if a 6 button obc has a bracket that will hook up to the analog clock?

[SpartanTiger81]

Send it to me, I'll fix it for you. HAHAHAH

[JasonC]

I just picked one up, but the + button seems to be broke. It doesn't click when pressed like the - button. Anyway, it hasn't been wired in yet, but does anyone know if one of the buttons is broke, can you still set the clock just using the other button?

Mines the same way. Someone with a fat fingers pressed it and broke it. Just set it with the - button.

[robrez]

I just picked one up, but the + button seems to be broke. It doesn't click when pressed like the - button. Anyway, it hasn't been wired in yet, but does anyone know if one of the buttons is broke, can you still set the clock just using the other button?

[SpartanTiger81]

Thank you BMW325csi. Wired everything up and tried out a spare digital clock I had. Worked perfectly..

[SpartanTiger81]

PM sent..

[bmw325csi]

^Sure, just grab a volt meter and find the 4 wires you need, then just tape off the rest.

[SpartanTiger81]

Anybod tried this with a 13 button OBC harness?

[SpartanTiger81]

Is it the same when installing from a 13 button obc harness?

[GraphicRage]

I just installed an analog clock last night, whole lot easier when you're just replacing a digital clock with it, the wiring is the same. :p