ball joint separators just like that are 15 bucks at harbor freight
Your handiest tools
Collapse
X
-
snapon 7.2v 3/8 electric impact, but if your only using it to work on e30s then dont be lazy like me.Comment
-
DENY IGNORANCE!
Schwarz 325-totaled
brilliantrot 318i-daily
Originally posted by mkcman17don't think your hamster wheels are fast now. you will still have to give up when trying to pass that V6 odyssey to make your offramp.
Comment
-
Comment
-
anything that you have an air tool for. :)
i mostly use it for the following:
- air impact to remove highly torqued/stubborn nuts/bolts (SO much easier to pull a trigger vs getting a breaker bar and/or cheater bar, especially in tight spaces) and then put them back on
- refill tires
- power my cut off wheel to cut the crap out of metal like it was soft butter
- helps make my plasma cutter work. :twisted:
a few of my friends use their air ratchet for removing pretty much any bolt, some use their compression them for painting, the list goes on and on.Comment
-
matco 6mm nutdriver for bmw hose clamps.OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
Comment



Comment