Turning Service lights off via jumper wire/diagnostic connector

[TopOfTheLine89]

^^^^

say around the 04/87 ETA?

production date 10/86.

[papajetta]

http://www.unofficialbmw.com/repair_faqs/sil.html

heres the link to both style connectors

[StereoInstaller1]

Only 2 things I am gonna add: use a 1A fuse, even 5A is too big. Second, use a pushbutton so you can also easily use it to adjust your valves.

[TopOfTheLine89]

http://www.unofficialbmw.com/repair_faqs/sil.html

heres the link to both style connectors

thanks.

[Bimmerboy91]

yes thanks!

[Lyrred]

bump for a good thread :)

[THE FEZMAN]

lol.... shove a pair of needle nose pliers in there and be done with it...

[steinbachphoto]

lol.... shove a pair of needle nose pliers in there and be done with it...

funny

[Massive Lee]

If service lights don't reset, then it's time to change the SI board batteries.

[Disco Benny]

hey guys I just bought a 1985 325e and I have a engine connector with a red cap that has 11 usable connector pins/holes...how does this compare?

Also, on my cluster which wire do I cut to make that "Brake lining" light disappear...my brakes are fine and I do not care about ther sensor

[JasonC]

No need to cut wires, just take the cluster out and remove the bulb. The cluster is very easy to take out. Once you figure it out.

[Disco Benny]

thanks JasonC, any gouge on this 11-pin connector?

And WOW talk about EASY on the brake lining light...now onto the Service Light and I should alright!

Its the 15-pin...got it. Resetting when I get home