Announcement

Collapse
No announcement yet.

DIY - All Red Taillights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cakey
    replied
    VHT Nite-Shade >>> Testors Candy Red.
    Tried both and VHT won hands down. Deeper cherry red and blended better.
    Used Voyd method

    Last edited by Cakey; 07-19-2016, 09:02 PM.

    Leave a comment:


  • frshmaestro
    replied
    Just did mine


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • *freshm3
    replied
    I will be tackling this tonight with a 6 pack of Summer Ale and some patience! Thanks guys. I hope it will be a success!

    Leave a comment:


  • itskingsteelo
    replied
    Originally posted by Voyd View Post
    Schwarz3 makes some excellent points. Here are some pics of the process I have been using to tint tails for my customers. I used products that can be found by any DIY'er.

    Products used. Disregard the Rustoleum clear and use the SprayMax 2k clear. I will snap a pic if anyone wants.


    OEM amber tail:


    Wax and grease remover:


    600 grit:


    Wetsand everything:


    Final product after sanding. Everything should be dull:


    Tape off:


    Wax and grease remover again:


    Tack the tail:


    1st coat:


    2nd coat:


    Final coat of color. You can see the blended area. I don't tape off the amber as it leaves a hard line and I will be clearing so the blend wont be visible.


    Wetsanded again w/ 2000 grit and ready for clear:


    Clear applied:


    Wetsanded w/ 2000 grit and buffed:







    great write up

    Leave a comment:


  • itskingsteelo
    replied
    Originally posted by Uber E30 View Post
    Mine with Model Masters transparent black:







    holy shit that looks sexy. did you paint them red then the clear black or did you just go with the clear black?

    Leave a comment:


  • RCM3
    replied
    Just did my extra set of tail lights in all red. First time doing it, but I used the VHT nightshades. Sanded the tail lights with 1000, sprayed 3 coats of red, sanded with 2000, cleared twice. Came out darker than I was hoping, but that could be due to the overcast weather.


    Last edited by RCM3; 02-07-2013, 06:13 PM.

    Leave a comment:


  • MattTHEe30GURU
    replied
    This with red reverse light. (whole light red) would look amazing!

    Originally posted by ///schwartzman View Post
    I got a demo on mine... I'm sold!



    What's the p/n on the euro tails?

    Leave a comment:


  • blueapplesoda
    replied
    Use the VHT Niteshades. Its much better than testors, and a few notches better than metalcast red.

    Leave a comment:


  • ST1G
    replied
    I used testors paint. Candy apple red. Mine turned out okay I think. I did two coats.

    Photos in my sig.

    Leave a comment:


  • gregrego
    replied


    3m red tint film, tinted the whole taillight, I don't really care for reverse lights, but might cut them out. Still thinking about it.

    Leave a comment:


  • Kershaw
    replied


    vht niteshades. it works great.

    Leave a comment:


  • ///schwartzman
    replied
    Originally posted by CB-M3 View Post
    def gotta leave the reverse part white. all red seems a bit much.
    I agree. I think all the amber lenses will be smoked or red.

    Leave a comment:


  • StatußQuoColonia
    replied
    Originally posted by Bochka916 View Post
    Euro BMW have real all red tails. My cousin bought a set and yes they are real BMW all red taillights.
    No.

    Leave a comment:


  • CB-M3
    replied
    def gotta leave the reverse part white. all red seems a bit much.

    Leave a comment:


  • ///schwartzman
    replied
    I got a demo on mine... I'm sold!



    What's the p/n on the euro tails?

    Leave a comment:

Working...
X