DIY - ABS relay repair - Fix that ABS light

[Panici]

Link in first post is broken, but I managed to grab a copy, with the original pictures.

See the PDF attached to this post.

[EddieV2]

Thank you! Mine's been on forever

[driftxsequence]

Repaired the relay under the dash last night...unfortunately the light is still on. You can hear the relays at the pump clicking at key on now. Anyone experience this?

[cscracker]

If, like me, you're awful with a soldering iron, you can do what I did and just solder the tab right to the base (instead of trying to add wires or replace the fusible link), and put a fuse inline. Cut the wire that connects to that tab, crimp spade connectors on the ends, and plug in a 7.5 amp fuse. I got a little fancy with mine and used some heat shrink to hold the spade connectors together. Cheap, easy, doesn't require skill with a soldering iron.

[Alpinweiss II]

Very helpful, thanks!

[cobraken]

subscribed