I have spent far too much time searching the forums for this simple answer.
This is what MS2 says:
"Frequency to operate at. This varies with valve type. Ford/Bosch valves typically operate 50-100Hz. Miata valves are closer to 300Hz.
Be aware that above 78Hz the output becomes less precise."
Does anyone have a definitive answer on what the factory M20 ICV hz setting in MS should be?
This is what MS2 says:
"Frequency to operate at. This varies with valve type. Ford/Bosch valves typically operate 50-100Hz. Miata valves are closer to 300Hz.
Be aware that above 78Hz the output becomes less precise."
Does anyone have a definitive answer on what the factory M20 ICV hz setting in MS should be?
Comment