I pre-ordered a Mafsync module

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 88Sedan
    Wrencher
    • Apr 2023
    • 249

    #1

    I pre-ordered a Mafsync module

    This new maf adapter system opened for pre orders and I went ahead and participated. My car is down for a while so even after it ships in 4-6 weeks I will probably have to wait to test it.

    It interested me because it's plug n play and should greatly improve throttle response. If I get around to building a b27 or b28 stroker the afm won't be a restriction anymore and I can still use a chip to tune.

    I know sssquid was working on a similar adapter before going belly up.

    MAFSync is an aftermarket airflow meter translator device for off-road use. Pre-tuned for your BMW engine. Available for M20, M30, M40, M42, M43.
  • TobyB
    R3V Elite
    • Oct 2011
    • 5258

    #2
    Derf.

    In the
    'why don't I get off my butt
    and parallel the AFM
    and a MAF
    and log the two simultaneously
    and just map a transfer function
    and use an Arduino Nano to run said function
    and be done with it all'

    department.

    t
    it's just a>d, numbers,
    and then d>a.
    an how hard can that be?

    heh.
    now, sometimes I just mess with people. It's more entertaining that way. george graves

    Comment

    Working...