Ideal Megasquirt Setup

[dave.a.cote]

Do you have plans for boost?

[SwiftE30]

1. Unless you or your tuner have tuned a VANOS motor before, don't waste your time and money on MS. Spend the cash and get a tried and true tune from someone like TRM. Drive-ability will be much better across the board, and will allow you to take advantage of VANOS.

2. That injector size will be too small for a gt35r or gt40.

Do some research on bimmerforums' Forced Induction section, there's all you need to know there. ;)

http://forums.bimmerforums.com/forum...play.php?f=150

What size injector do you think will be big enough?

[nando]

Do you have plans for boost?

no immediate plans, but should I decide to later, I don't have to worry about my injector size too much. :)

I'd think 24# should be plenty for most N/A setups.

[dave.a.cote]

My wife bought me an Eaton M-62 supercharger for my birthday - is that cool or what?

Swift - I was thinking I would need something in the high 30, maybe 40lb to run ~6 or 7 psi boost.

[whodwho]

30# should work at that psi, I get about 90% duty at 10psi @ 12.5 - 12 afr