Help with ms2 m30 base tune

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Karlm30
    Noobie
    • Feb 2013
    • 13

    #1

    Help with ms2 m30 base tune

    Hi guys almost done with my build I need to see if any of you guys would be nice enough to supply me with a nice base tune I can use to atleast drive to the tuning shop. If you have a finished tune that be even better I'm even willing to pay if its a finished product.

    Ms2
    7 psi
    44lbs injectors
    Stock m30b34

    Tia!! Any help will do
  • ZenitramNaes
    Advanced Member
    • Jul 2012
    • 150

    #2
    Hey Karlm30,

    Did you ever get a decent tune?

    '89 535i/5 Holset WH1E turbo
    Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

    Comment

    • Paradox
      Grease Monkey
      • Jul 2010
      • 337

      #3
      Found these base maps yesterday:


      This map will get you started, but you will still need to continue to refine it for your specific set up.

      Comment

      • ZenitramNaes
        Advanced Member
        • Jul 2012
        • 150

        #4
        Greatly appreciated. I'll give those a look over, thank you!

        '89 535i/5 Holset WH1E turbo
        Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

        Comment

        • whodwho
          E30 Mastermind
          • Jun 2008
          • 1547

          #5
          You can start with a M20 tune and adjust the required fuel and will get you going
          My M20 Frankenbuild(s)
          4 Sale - Fully Built TurnKey Megasquirt Plug and Play EMS

          Comment

          • ZenitramNaes
            Advanced Member
            • Jul 2012
            • 150

            #6
            Originally posted by whodwho
            You can start with a M20 tune and adjust the required fuel and will get you going
            Would you suggest that over the m30 base map for someone that has an m30 motor?

            '89 535i/5 Holset WH1E turbo
            Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

            Comment

            • Jaxx_
              E30 Mastermind
              • Dec 2009
              • 1880

              #7
              check out mye28.com, there are quite a few ms guys there that will lend you a map for the m30.
              '84 318i M10B18 147- Safari Beige
              NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
              Turbo: 221whp/214ftlbs, MS3x flex @ 17psi

              Comment

              • nando
                Moderator
                • Nov 2003
                • 34827

                #8
                Originally posted by ZenitramNaes
                Would you suggest that over the m30 base map for someone that has an m30 motor?
                The differences will be pretty minimal.
                Build thread

                Bimmerlabs

                Comment

                • ZenitramNaes
                  Advanced Member
                  • Jul 2012
                  • 150

                  #9
                  Got it, appreciate it guys.

                  '89 535i/5 Holset WH1E turbo
                  Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

                  Comment

                  Working...