Announcement

Collapse
No announcement yet.

Help with ms2 m30 base tune

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help with ms2 m30 base tune

    Hi guys almost done with my build I need to see if any of you guys would be nice enough to supply me with a nice base tune I can use to atleast drive to the tuning shop. If you have a finished tune that be even better I'm even willing to pay if its a finished product.

    Ms2
    7 psi
    44lbs injectors
    Stock m30b34

    Tia!! Any help will do

    #2
    Hey Karlm30,

    Did you ever get a decent tune?

    '89 535i/5 Holset WH1E turbo
    Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

    Comment


      #3
      Found these base maps yesterday:


      This map will get you started, but you will still need to continue to refine it for your specific set up.

      Comment


        #4
        Greatly appreciated. I'll give those a look over, thank you!

        '89 535i/5 Holset WH1E turbo
        Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

        Comment


          #5
          You can start with a M20 tune and adjust the required fuel and will get you going
          My M20 Frankenbuild(s)
          4 Sale - Fully Built TurnKey Megasquirt Plug and Play EMS

          Comment


            #6
            Originally posted by whodwho View Post
            You can start with a M20 tune and adjust the required fuel and will get you going
            Would you suggest that over the m30 base map for someone that has an m30 motor?

            '89 535i/5 Holset WH1E turbo
            Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

            Comment


              #7
              check out mye28.com, there are quite a few ms guys there that will lend you a map for the m30.
              '84 318i M10B18 147- Safari Beige
              NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
              Turbo: 221whp/214ftlbs, MS3x flex @ 17psi

              Comment


                #8
                Originally posted by ZenitramNaes View Post
                Would you suggest that over the m30 base map for someone that has an m30 motor?
                The differences will be pretty minimal.
                Build thread

                Bimmerlabs

                Comment


                  #9
                  Got it, appreciate it guys.

                  '89 535i/5 Holset WH1E turbo
                  Follow my m106 megasquirt build thread: http://forums.bimmerforums.com/forum...Squirt-content

                  Comment

                  Working...
                  X