ie longtube or bavauto longtube??????

[PeaveyBassist]

lol, An old guy in a Jeep cherokee pulled out in front of me. I just got a check from his insurance company for $3500 ;) Picking up another e30 in NC on the 23rd.

Will

[nando]

you crashed it AGAIN? man, you need to learn how to drive or something. ;)

[PeaveyBassist]

But all of them should be relatively close correct? Or am I just confused?

Will

[digger]

It won't make anything right now, it was wrecked ;) And notice I said around 150whp. This was about a 70 degree day with a lot of humidity and it was raining. Dynos should only read a couple hp different if they are both set up properly. You can make a dyno say that you have 800hp if you want to. Trust me, the m20b25 is rated at 168hp at the crank. Old m20's CAN get 145hp at the wheels stock. At the wheels it should be around 150 with a brand spankin new engine (new rings, bearings, head gasket, valve seats, valve guides, etc. Also, my statement above was with a COMPLETELY stock engine just rebuilt.

Will

and as i said it depends on the type of dyno you use. Dynojet read different to mustang, dynapack, dyno dynamics etc etc and each can be setup differently

[PeaveyBassist]

It won't make anything right now, it was wrecked ;) And notice I said around 150whp. This was about a 70 degree day with a lot of humidity and it was raining. Dynos should only read a couple hp different if they are both set up properly. You can make a dyno say that you have 800hp if you want to. Trust me, the m20b25 is rated at 168hp at the crank. Old m20's CAN get 145hp at the wheels stock. At the wheels it should be around 150 with a brand spankin new engine (new rings, bearings, head gasket, valve seats, valve guides, etc. Also, my statement above was with a COMPLETELY stock engine just rebuilt.

Will

[digger]

Just so everyone knows... a new healthy m20 with good compression and everything should be around 150hp and 150lb ft at the wheels. I have a dyno sheet to prove it.

Will

depends on the dyno and the state of tune or if there are mods. You can guarantee that your car won't make 150whp on all dynos they are all different.

[tonytony]

awesome man

[e30_325es]

Alright, thanks. I've got to avoid speed bumps now anyway. You just made me decide which headers to get!

[tonytony]

Tonytony, I'm looking to get the bavauto headers. How low was your car that you always hit stuff? What did you hit the most?

with 205/60/14 i had one finger clearance in the front fender gap, so they were pretty low. most of the stuff i hit was just speed bumps when i wasn't thinking about it and super steep inclines into parking lots.

[PeaveyBassist]

Just so everyone knows... a new healthy m20 with good compression and everything should be around 150hp and 150lb ft at the wheels. I have a dyno sheet to prove it.

Will

[e30_325es]

Tonytony, I'm looking to get the bavauto headers. How low was your car that you always hit stuff? What did you hit the most?

[n12frost]

lol..it sounded like that the first time i saw that to..

[tonytony]

tru dat, ............




.....but id also like 2 hook up......to see your header......and you can hear my borla

i'll show you mine if you show me yours j/k haha

[JRKOUPE]

[QUOTE=n12frost;590263]what we really need to do is get a big meet together. a whole bunch of us r3v guys that live near by.[/QUOTE


tru dat, ............




.....but id also like 2 hook up......to see your header......and you can hear my borla

[n12frost]

what we really need to do is get a big meet together. a whole bunch of us r3v guys that live near by.