headers

[moatilliatta]

Nice pinch weld/ seam

[tonytony]

that thing is like an inch off the ground! The bavauto headers on my m20 hung about 4inches off the ground

[slim_l2002]

that thing is like an inch off the ground! The bavauto headers on my m20 hung about 4inches off the ground

ok so is your car lowered or at its stock height?

[tonytony]

lowered on IE3s with 205/60/14 tires, probably not nearly as low as your car since you have 10mm drophats

[Slick92GS-R]

here is a comparo i did of my IE shorty's back in 2005..still on my car now.. without any issue whatsoever ..
it should give u an idea about the design and a visual of the flow pattern
the downpipe/b-pipe needs to be welded to a flange to connect to your catalytic. any muffler shop should make sure that they (headers) have sufficient clearance. my car is on Koni's w/IE stage III's and DD on 14" basket weaves..

http://r3vlimited.com/board/showthread.php?t=60774