30lb injector Help ????

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 1990e30coupe
    Advanced Member
    • Jul 2010
    • 126

    #1

    30lb injector Help ????

    I was woundering if anyone on here knows where to find 30lb injectors for my m20b25 turbo project? If anyone can point me in the right direction or give me a link that has some with reasonable prices i would appretiate all the help, Thanks.
    What BMW means to me: Breaks My Wallet
  • einstein57
    R3V OG
    • Jun 2007
    • 10780

    #2
    ebay for some ford racing. used ones go for about 100 rebuilt. Summit racing injectors aren't bad. I think they are the same ones that TCD uses. And there is always diyautotune. I'd part with my almost new 30lb injectors for 180
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    www.gecoils.com
    My euro 316 project Transaction Feedback

    Comment

    • Dj Buttchug
      R3V OG
      • Jun 2010
      • 7625

      #3
      30lb volvo injectors. ebay it

      Turbo M42 Build Thread :Here
      Ig:ryno_pzk
      I like the tuna here.
      Originally posted by lambo
      Buttchug. The official poster child of r3v.

      Comment

      • einstein57
        R3V OG
        • Jun 2007
        • 10780

        #4
        Volvo injectors are low impedance and won't work with a 173 ecu if your going that route. I also have a set of volvo injectors for 40.
        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

        www.gecoils.com
        My euro 316 project Transaction Feedback

        Comment

        • 1990e30coupe
          Advanced Member
          • Jul 2010
          • 126

          #5
          well i am going to be running stand alone from diyauto. Will 30lbers run 12 pounds of boost with stand alone ok or should i look for 34lbers?
          What BMW means to me: Breaks My Wallet

          Comment

          • nando
            Moderator
            • Nov 2003
            • 34827

            #6
            they might work but they are a bit small. I'd start at 42# so you'll have some headroom left.

            low impedance injectors are more work than they are worth these days, even if you have standalone.
            Build thread

            Bimmerlabs

            Comment

            • ForcedFirebird
              R3V OG
              • Feb 2007
              • 8300

              #7
              Injectors from a 3800 GM supercharged v6 are a direct fit, 36lb/hr, and plentiful.
              john@m20guru.com
              Links:
              Transaction feedback: Here, here and here. Thanks :D

              Comment

              Working...