What's your whp?

[M20power93]

I'm just curious to know what everybody's whp is whether it's factory or with mods or whatever, tq would be cool too. be detailed if you can.

[619E30]

I should be dyno-ing my car within the next couple weeks, I will post when I get results.

[mr.vang]

stock m42 236,xxx 100whp..

[DmcL]

133whp most recently but theres something up with the engine physically because i was on a wee tuning session on the dyno and nothing i tried would make any real difference to peak numbers. i tried more/less advance and also more/less fuel but end results were always within a window of maybe 3hp of my 133whp run. bit like im hitting an invisible wall at 133whp.

[reelizmpro]

88 M3 2.3 liter 284/276 cams, CF intake, street tuned - 200rwhp on dynojet. Hoping to get 220rwhp after the rebuild.

91 M Technic 2.5 liter, turbocharged - 265rwhp @ 12lbs of boost tuned on Dynapak.

[ForcedFirebird]

134whp/145wtq m20b27 with 885 top end and Motronic 1.3 upgrade, stock eta exhaust, stock airbox, stock chip, stock inj etc etc.

[Holland]

93.7 whp of solid M10b18 fury.

[stoker1010]

121rwhp.

323i L-jet
Shick 284/272 cam
headers - 2.5 exhaust

[reelizmpro]

121rwhp.

323i L-jet
Shick 284/272 cam
headers - 2.5 exhaust

That's good power! Any plans for 2.7 conversion?

[jlevie]

Numbers don't mean a lot by themselves as different brands on dynomometers produce diffeing results. Comparison the other cars on the smae dyno is much more meaningful. That said, my Spec E30 made 162hp/155tq on a DynoJet on a 100F day. The numbers would have been a bit higher on a cooler day. As an FYI, a Spec E30 is required by the rules to have bone stock engine and management system.

[ForcedFirebird]

Numbers don't mean a lot by themselves as different brands on dynomometers produce diffeing results. Comparison the other cars on the smae dyno is much more meaningful. That said, my Spec E30 made 162hp/t115tq on a DynoJet on a 100F day. The numbers would have been a bit higher on a cooler day. As an FYI, a Spec E30 is required by the rules to have bone stock engine and management system.

115tq?

[stoker1010]

That's good power! Any plans for 2.7 conversion?

Probably leave it as is. It is a bit of a classic car when it is its original trim.

[e30trooper]

m20b27 (stock eta) 320,000 miles
had a few issues at the time

Made 88Hp to the wheels at 4953 rpms ( stock ship )
Made 118 ft lbs of tq at 1800 rpms

This was done on a Mainline Dynolog
3rd gear pull till rev limiter
Only mod was a short ram intake and 87 oct. gas
few intake leaks , not sure what happened at 3700-4400 rpms

Funny how ppl wasy the eta loses power at 4300, i had peak at 4900






dam how i miss that car!

[jlevie]

115tq?

Typo, should have been 155tq

[wakdog]

My 323i made 123whp at 5200rpm, It has slightly higher comp pistons from an e21 m20 (no idea of what it was) heavily ported AMC head and a reground cam of which i know not alot about.

Car was running L-jet but last track day did a bearing so out with the 2.3 and in with the 2.7 bottom end i had built last year, and at the same time Ill be converting to megasquirt/running 325i intake mani and m30 TB as well as a proper exhaust so it should be interesting to see what it makes then...