Recently blew the HG, so I decided to Redo everything. Put new plugs, 19lb injectors and the mark d chip for the 19lb. So first start up a bit of sputtering and it ran and idled around 1300rpm. Third startup it just cranked no start. Checked for spark and I have spark. Checked my dipstick and it smells like fuel. So I'm getting fuel lol. Went a pulled a plug and it was drenched in fuel. Guessing that was my fault pressing the gas pedal trying to start it up that third time. Any ideas?
Announcement
Collapse
No announcement yet.
HG/timing belt/arp head studs installed no start
Collapse
X
Comment