Recently blew the HG, so I decided to Redo everything. Put new plugs, 19lb injectors and the mark d chip for the 19lb. So first start up a bit of sputtering and it ran and idled around 1300rpm. Third startup it just cranked no start. Checked for spark and I have spark. Checked my dipstick and it smells like fuel. So I'm getting fuel lol. Went a pulled a plug and it was drenched in fuel. Guessing that was my fault pressing the gas pedal trying to start it up that third time. Any ideas?
HG/timing belt/arp head studs installed no start
Collapse
X
Comment