Announcement

Collapse
No announcement yet.

Cams and a Tune

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cams and a Tune

    I bought my car with 272 ie cams. and i was looking into getting a ecu chip but i heard if you have cams you have a tune. is this true? do i already have a tune?

    #2
    Not true. Do you have a tune? Can you CARRY a tune???

    Open your ecu and look at the chip... that or rev it 'till it hits
    the limiter and see if it's over stock...

    Where's the second cam? In the trunk?

    t
    now, sometimes I just mess with people. It's more entertaining that way. george graves

    Comment


      #3
      lol

      if you have a cam (aftermarket cam, they have one from factory) you need a tune (a retune, they also have a tune from factory). you dont get a tune by installing a cam.

      Comment


        #4
        Originally posted by TobyB View Post
        Not true. Do you have a tune? Can you CARRY a tune???

        Open your ecu and look at the chip... that or rev it 'till it hits
        the limiter and see if it's over stock...

        Where's the second cam? In the trunk?

        t
        he said cams not camshafts so the camshaft has 12 cams on it one for each valve

        also the OP already has a tune, it came that way from the factory

        end being smartass/
        89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

        new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

        Comment


          #5
          Open your ECU and take a look.
          BimmerHeads
          Classic BMW Specialists
          Santa Clarita, CA

          www.BimmerHeads.com

          Comment


            #6
            ok i guess ill be busy open up my ecu this week.
            also how can i tell if i have a afm or maf? i have a huge k&n intake if that helps.

            Comment


              #7
              This is an AFM:


              This is a MAF:
              BimmerHeads
              Classic BMW Specialists
              Santa Clarita, CA

              www.BimmerHeads.com

              Comment


                #8
                Originally posted by MR 325 View Post
                This is an AFM:


                This is a MAF:
                i was just hanging out with danny at united artists starbucks and he said i have a chip so we're good :)

                how can i tell if i have cams or the past owner ripped me off. -.-
                and i believe i have stock afm. :(

                Comment


                  #9
                  take the cam cover off. have a look. see if you have more then one. or if the one you have is bigger then a stock one. but id be carefull many good men have had their teeth knocked out checking out another mans cam.

                  Comment


                    #10
                    Originally posted by e30leigh View Post
                    take the cam cover off. have a look. see if you have more then one.
                    Lol you made that sound very believable. You must have a lot of fun with the apprentices sending them away to get a long weight.

                    Comment


                      #11
                      If you bought the car thinking it has an aftermarket camshaft, without asking for receipts, it doesn't have an aftermarket camshaft.

                      Comment


                        #12
                        oh joy, oh well :/
                        it sounds and feels like its cammed though. ill see i guess.

                        Comment


                          #13
                          definately cammed compared it to a video of my friends e30 with similar mods and sounds identical. :) pretty happy

                          Comment


                            #14
                            If U like the car. all is good.

                            Unless it has an M50/52/s50/m42, you really DO only have one cam, though.

                            And next time U have it in 2nd gear, don't shift until it does 'dit- dit- dit'

                            If U are doing 6200 rpm (6700 for 318is) then U do not have a tune. Not even camptown races.

                            But if U see 6700 (7300 for 318is) U are in like Flynn.

                            Not that it matters, since U R happi!

                            all is good.

                            t
                            now, sometimes I just mess with people. It's more entertaining that way. george graves

                            Comment


                              #15
                              Originally posted by The Humjet View Post
                              Lol you made that sound very believable. You must have a lot of fun with the apprentices sending them away to get a long weight.
                              a can of compression is my fav hahaha

                              Comment

                              Working...
                              X