How far below deck does the valve reach in a 885 head with stock HG and stock cam, I mean how many mm the tip of the valve is below deck?
-
Last edited by gath; 06-02-2013, 05:45 AM. -
Valve lift with the stock cam is 10.1 mm if I remember correctly, note that this is measured from the valve seat area and not from the bottom of the valve.Turbocharged 2.7l M20
Forged pistons, forged rods, bored block, stock head, KDFI standalone ECU, MSD Ignition setup, T04E turbo running 349 whp
-Watash Racing Team member- -
the answer to this question wont tell you how much piston to valve clearance you'll have.89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
...but modelling clay will...
tnow, sometimes I just mess with people. It's more entertaining that way. george gravesComment
-
89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
Comment