Hey everyone. Just got some questions about this build that I'm going to be doing.
I currently have a 01/87 325e eta and I'm going to get a complete 91 vert 325i motor, harness/wires. Also getting a 98 vert M52 2.8l crank.
So I'm going to put the crank in the eta block, use the eta rods, (130 mm) the 325i pistons and 325i head. (885) Now I know I have to make that spacer for the nose of the m52 crank (also would like to know about the specs on that)
Now I know some builds had to shave down the counter weights on the crank about .25" just to clear the piston skirt and then get it balance.
Also questions on what the compression ratio would be- what tune should I use, (I'm going to convert with the 173 electronics) what cam should I use? And what other upgrades I need to do??? Cam gear, rocker arms, ect ect
Just trying to find a guide line of what to do.
Read some threads on this build and so far found some awesome info, and also some negative feed on it as well.
This is going to be a street car that I would like to take on the track- road course/drifting.
Thanks for the help if you can. This would be a great guide line for me to complete this build.
I currently have a 01/87 325e eta and I'm going to get a complete 91 vert 325i motor, harness/wires. Also getting a 98 vert M52 2.8l crank.
So I'm going to put the crank in the eta block, use the eta rods, (130 mm) the 325i pistons and 325i head. (885) Now I know I have to make that spacer for the nose of the m52 crank (also would like to know about the specs on that)
Now I know some builds had to shave down the counter weights on the crank about .25" just to clear the piston skirt and then get it balance.
Also questions on what the compression ratio would be- what tune should I use, (I'm going to convert with the 173 electronics) what cam should I use? And what other upgrades I need to do??? Cam gear, rocker arms, ect ect
Just trying to find a guide line of what to do.
Read some threads on this build and so far found some awesome info, and also some negative feed on it as well.
This is going to be a street car that I would like to take on the track- road course/drifting.
Thanks for the help if you can. This would be a great guide line for me to complete this build.
Comment