Help with cam removal

[Jimmyac28]

What else can I do to get the cam off?

[Jimmyac28]

Have you tried carefully "persuading" it with a wood dowel and a hammer ?

Yes I did, but its no moving

[jeffnhiscars]

Have you tried carefully "persuading" it with a wood dowel and a hammer ?

[e30sh]

If the rockers are out of the way/ cam seal housing removed, the only thing I can think of is a low/ no oil pressure issue chewed up the cam bearings. I bought a head one time that looked perfect until the cam cam out.

Since the rocker shafts came out easy, it' shouldn't be too warped.

Good luck.

[Jimmyac28]

Cam rotates, rockers slid out...you need to remove the cam seal housing. Someone may have bonded it to the head

Cam seal housing is off

[Jimmyac28]

here are the pictures

https://goo.gl/photos/hHtJw8at17P7dRfF7

[jeffnhiscars]

Cam rotates, rockers slid out...you need to remove the cam seal housing. Someone may have bonded it to the head

[Jimmyac28]

I have a photo but I says upload error everytime I try to upload it

[digger]

take a photo of the disassembled head you have in front of you

[Jimmyac28]

t

Yes, I can turn it using the can sprocket bolt and a wrench. Im I missing something or could it be a warped head?

[TobyB]

Can you get the cam to rotate?

t

[Jimmyac28]

Did the rocker shafts slide out easily? Can you get the cam to rotate? Is the head warped or cracked?

The rocker shafts came out pretty easy, no sure if the head is warped, cant see any cracks.

[redlightpete]

Did the rocker shafts slide out easily? Can you get the cam to rotate? Is the head warped or cracked?

[Jimmyac28]

Did you unbolt the cam seal housing ?

Yes but the cam still wont slide out

[jeffnhiscars]

Did you unbolt the cam seal housing ?