If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
X2, If I was offered that as a cam core I would have laughed, loudly, and rudely. You cannot "polish out" journal lobes that bad.
If you paid for that, I would politely ask for a refund on the part at least (and eat the shipping). No self-respecting enthusiast would sell that to another enthusiast.
If he refuses, I'm sure the mods will not take kindly to it.
The scored journal shown is one that rotates in the cylinder head, not a cam lobe that would get reshaped during a regrind.
As Toby mentioned, this is a good cam for using when you are are on the side of a road in a third world country and the cam in your motor is in two pieces. Or three pieces.
Otherwise, the cam is junk and the seller is either ignorant or a swindler.
The scored journal shown is one that rotates in the cylinder head, not a cam lobe that would get reshaped during a regrind.
As Toby mentioned, this is a good cam for using when you are are on the side of a road in a third world country and the cam in your motor is in two pieces. Or three pieces.
Otherwise, the cam is junk and the seller is either ignorant or a swindler.
Whoa totally missed that. Thanks for the correction!
Comment