Manuel Swap

[Beamerboi]

I already have the Transmission and pedals what else to I need?


Sent from my iPhone using Tapatalk

[MrBurgundy]

You need Jose too

[Beamerboi]

Manuel Swap

You need Jose too

Lol who’s that? I already got a mechanic just need the parts list without anything left out .



Sent from my iPhone using Tapatalk

[Reichart12]

You need Jose too

José

[Beamerboi]

José

[emoji35]


Sent from my iPhone using Tapatalk

[MrBurgundy]

🤮


Sent from my iPhone using Tapatalk

[Beamerboi]

🤮


Sent from my iPhone using Tapatalk

[emoji81]


Sent from my iPhone using Tapatalk

[GoochE30]

Lol who’s that? I already got a mechanic just need the parts list without anything left out .



Sent from my iPhone using Tapatalk

They are just referring to the fact that you misspelled manual! There is a lot of information about manual swaps here. The search bar up too will help or you can scroll through the pages in the transmission section. It’s under engine and drivetrain. Good luck! Hopefully you’ll be banging gears before too long.

[Beamerboi]

They are just referring to the fact that you misspelled manual! There is a lot of information about manual swaps here. The search bar up too will help or you can scroll through the pages in the transmission section. It’s under engine and drivetrain. Good luck! Hopefully you’ll be banging gears before too long.

Lolol oh wow ya oops[emoji38] ya I did my research. It’s gonna take a little longer but will be worth it!


Sent from my iPhone using Tapatalk

[jgilber0]

I'm working on this too, gathering parts now. There are a ton of good writeups on AT/MT swaps, just search on Google and you'll find many sites and links to follow.

Figure on about $1,000 for all of the parts, another $800 to $1000 to install at an inexpensive shop, much more at other places. DIY is difficult, especially lying on the floor in a dark garage. You really want access to a lift to make this a pleasant experience.

Here is my list, gleaned from a variety of sources over the past year. Parts with an (x) are things I already have; still buying other pieces. I hope this helps.

M/T swap parts list

Transmission input shaft seal
Engine rear main seal

Transmission (x)
Transmission oil
Transmission crossmember (x)
Transmission mounts (x)
Transmission mount nuts (x)

Shifter assembly (x)
Selector rod | Shift link w/washers and clips (x)
Shift handle (x)
Shift knob and emblem (x)
Nylon cup and bushing (x)
Shift lever insulating rubber boot (x)
Shift lever leather boot (x)
Lock pin for support arm (?)
Bushing mounting nut (x)

Transmission to block bolts (set, you can reuse the bolts that came off your auto)

Guibo bolts (need new)
Guibo (x)

Driveshaft (x)
c.v. joint nub (?)
Center bearing assembly (x)

Reverse light switch
M/T reverse lamps wiring harness BMW p/n 23141220263
Clutch cruise control switch and wiring

Flywheel (needs machining)
Flywheel spacer plate (x)
Flywheel bolts x8 (need new)

Throwout bearing
Clutch/Pressure Plate assembly (x)
Clutch fork (x)
Clutch fork bearing (x)
Clutch master cylinder
Clutch master fluid line connector (x)
Clutch slave cylinder
Clutch hardline

Firewall grommet
Clutch soft line (x)

Pedal assembly

Replacement exhaust hardware

[Beamerboi]

I'm working on this too, gathering parts now. There are a ton of good writeups on AT/MT swaps, just search on Google and you'll find many sites and links to follow.

Figure on about $1,000 for all of the parts, another $800 to $1000 to install at an inexpensive shop, much more at other places. DIY is difficult, especially lying on the floor in a dark garage. You really want access to a lift to make this a pleasant experience.

Here is my list, gleaned from a variety of sources over the past year. Parts with an (x) are things I already have; still buying other pieces. I hope this helps.

M/T swap parts list

Transmission input shaft seal
Engine rear main seal

Transmission (x)
Transmission oil
Transmission crossmember (x)
Transmission mounts (x)
Transmission mount nuts (x)

Shifter assembly (x)
Selector rod | Shift link w/washers and clips (x)
Shift handle (x)
Shift knob and emblem (x)
Nylon cup and bushing (x)
Shift lever insulating rubber boot (x)
Shift lever leather boot (x)
Lock pin for support arm (?)
Bushing mounting nut (x)

Transmission to block bolts (set, you can reuse the bolts that came off your auto)

Guibo bolts (need new)
Guibo (x)

Driveshaft (x)
c.v. joint nub (?)
Center bearing assembly (x)

Reverse light switch
M/T reverse lamps wiring harness BMW p/n 23141220263
Clutch cruise control switch and wiring

Flywheel (needs machining)
Flywheel spacer plate (x)
Flywheel bolts x8 (need new)

Throwout bearing
Clutch/Pressure Plate assembly (x)
Clutch fork (x)
Clutch fork bearing (x)
Clutch master cylinder
Clutch master fluid line connector (x)
Clutch slave cylinder
Clutch hardline

Firewall grommet
Clutch soft line (x)

Pedal assembly

Replacement exhaust hardware

Awesome man! Thank you so much! I think I’m just going to start with the bigger parts clutch,new flywheel, cylinders, etc when I start thinking of every bolt it’s overwhelming. But yes this list will help for sure! I’ll keep updating my progress here and on instagram.


Sent from my iPhone using Tapatalk

[Beamerboi]

Awesome man! Thank you so much! I think I’m just going to start with the bigger parts clutch,new flywheel, cylinders, etc when I start thinking of every bolt it’s overwhelming. But yes this list will help for sure! I’ll keep updating my progress here and on instagram.


Sent from my iPhone using Tapatalk

Can you use auto guibo and center support because I got them both new for the auto trans?


Sent from my iPhone using Tapatalk

[jgilber0]

Glad to help! I’ll likely do mine in 2019.

I think the guibo and center bearing may not be the same, but let’s see what others say.

[uturn]

Get the brass fork pivot and install a new clutch fork.

Get Luis, Miguel and Jose to help...Manuel is always slipping out.

[Beamerboi]

Get the brass fork pivot and install a new clutch fork.

Get Luis, Miguel and Jose to help...Manuel is always slipping out.

[emoji81] cool man I’ll keep that in mind! Thanks for all the help everyone! With the car and my spelling lol


Sent from my iPhone using Tapatalk