M30 swap for my Olive Drab Vert!

[RagtopE30]

So I have another dilemma. The block is supposedly from an E34 and is a M30B35. The problem is that the oil pump chain tensioner I bought for the B35 is not usable with this block because the boss for the mounting pin is non existent! So I have to use the old oil pump shims. But from what I can see on realoem all the e34s had the chain tensioners. WTF!

Edit: After looking over the block and the lack of certain engine mount mounting points I have concluded that this is a B34 block that has been punched out to a 94.0056 bore. Not a big deal except I had GoodNTight make me custom mounts for a B35 and they will not work with this block. And I still have to find shims for the oil pump.

Oh and new pictures on post #90!!!!!!!

[Good & Tight]

It's actually a good thing that it's a B34 block, they are stronger than the B35.
The B35 blocks are prone to cracking around the cylinder headbolts.

Search for "Qbang" he makes a real nice set of B34 mounts. I will buy your B35 mounts back.

[RagtopE30]

Otis, you are the man. Thanks for your help throughout this build!

[RagtopE30]

The baby is home!!!!! I have to wait for the new oil pump sprocket, chain, and shims to get here before I knock out the timing chain and oil pan but IT IS HOME!!!

[dougie30]

So excited to hear this thing scream! I would love to do this but i can only dream..

Sent from my SPH-L710 using Tapatalk 4

[RagtopE30]

Thanks for the support man! As usual life is keeping this build on the very slow but steady track. I should have the oil pan with oil return bung welded in and the intake with the TB mount flipped back this weekend.
I recently moved into a small shop and I am proud to say that I have removed the radiator support and am working on making it a bolt in affair!
I will add pictures of the gapping hole in the front end tomorrow.

[RagtopE30]

Got the radiator support completely divorced from the chassis. I spent a few hours afterwards removing unneeded brackets and cleaned up all the old welds and tabs.

While I was in there I also installed my Non ABS master cylinder and lines! Finally! I have had these parts for a couple of years now.

[Doughnut]

Mate, looking good!

Keep up the good work, every post you make makes me miss my e30m30 monster more and more....

They are a whole bunch of fun!

[jeffnhiscars]

Loving the shop Matt.

[RagtopE30]

Damn it! Why do I get side tracked so easily?
Today's distraction, I acquired some unobtainium that may find it's way onto the vert!

I present a set of 1983 Japan Epsilon 15x7" 4x100 e21 fitment mesh wheels

[jim325]

Got my wastgate on, when I get it set right, 16 psi, right now 18 psi cuz hitting overboost. LOOK OUT, IM COMIN FOR U!!! (When urs gets done after ur 9million side projects)

[rav320uk]

Sub'd!!:d

[RagtopE30]

Side projects, homework, and poverty keep this build on a slow and steady track

[kylelauffer]

what power are you shooting for? my spec clutch stage 4 started slipping at the end of summer.

[RagtopE30]

Goals for reliability and daily driving are 425-450hp to the wheels. This is of course with the mega squirt and moderate boost.