where can I find this for the cheapest? Turner doesn't have it listed online but they come up when I search. VAC wants like 600 for said cam. I swear I heard they were going for 400ish somewhere...
Announcement
Collapse
No announcement yet.
m30 schrick 284/280 cam
Collapse
X
-
Ireland sells 284 regrounds for like 190
Comment
-
I have not heard that before
Sent from my iPad using Tapatalk
Comment
-
mines a regrind dude so what u trying to say? lol but if you ask me all i see is a brand name that sells. i dont see my cam (a solid piece of metal) going anywhere anytime soon. The difference is the reputation sells obviously they do quality work too but so do many other places that dont have the rep. Thats just my opinion obviously if the regrind was from a unknown source then i would be weary.88' BMW 325is - Daily
Comment
-
I was able to find a Paul Burke T31 cam (287/279) used with less than 500 miles on it over on MyE28 for 450 shipped. Look around a little more and you'll find some good deals.My 2.9L Build!
Originally posted by Ernest HemingwayThere are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
Comment
-
Originally posted by Streichholzschächtelchen View Post
Also 8+ years old they could of changed machinist and many factors could of played into the failure of that cam
Comment
-
call paul burke and get a cam from him, he'll probably be able to give you one thats suits what youre trying to do89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by digger View Postcall paul burke and get a cam from him, he'll probably be able to give you one thats suits what youre trying to doMy 2.9L Build!
Originally posted by Ernest HemingwayThere are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.
Comment
-
Originally posted by PiercedE30 View PostI doubt you'd be able to get one. Paul has been battling some health issues the last few years and, as great as his products are, won't deal with him again. I ordered my pistons from him in February of last year and it took until december to get them. He knows his stuff, no questioning that, but I won't make another purchase through him, unfortunately.
mark@performancepartsracing.com89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by Streichholzschächtelchen View Post
Another option would be to have a "custom" ground cam from a rough chilled-iron casting (Paul and Mark buy the blanks from IE who buys in bulk out of Europe). You'd have an up charge though, given the grinder would have to be setup twice (one for each pattern). https://www.iemotorsport.com/bmw/E28...billetcam.html
Comment
-
That's crazy how important additives can be! Ill try to find the specs on the IE 284 regrind. If it's similar to the schrick (more lift than b35 @11mm, with similar overlap to b35) then I'm going with IE. Looking for streetability, with the option of using the same cam when I boost in the future.Jah bless! :pimp:
Comment
Comment