M30 E30 official roll call thread

[Heysüß]

just bought a M30 E30 !

you'll hear from me soon enough, as this is my first E30 period, I will have a lot of questions as soon as I'm out school for the semester.

[Chico335i]

This photos are a few years ago, in paint and engine jobs...
I take more in this days.

[LowR3V'in]

Engine pics?

[Chico335i]

Chasis e30 1985
M30b35
Made in Germany by Liebig
megasquirt I
Costa Rica

[Jean]

kylekrueger - e34 radiator? what engine mounts are you using? can you post some pictures.

[kylekrueger]

swapped m30b35 from 1992 e32 into a '89 325i
getrag 265 transmission
z3 shifter
custom drive shaft
e34 radiator
running stock e30 coolant reservoir with a custom T splice into e32 coolant piping
635 exhaust manifold and headers
full 3" exhaust with high flow cat and magnaflow muffler
Bosch 30# injectors
IE adjustable fuel pressure reg.
Dinan chip


other non-engine related modifications

team dynamic motorsport wheels
Dunlop direzza sport z1 star spec tires
Bilstein sport
Ground Control single adjustable coil over springs
Ground Control camber/caster plates

[zaust]

89 325i touring, Stripped and caged.

M30b35 and box from 90 e34 535i sport.
e28 flywheel (single mass) and clutch
z3 1.9 and e21 m20 shifter and rod's.
Modified 535 front half prop
3:46 lsd
Big bore TB with matched inlet manifold
gas flowed head with cat cam
Custom air induction pipe to give same surface as oem box with huge k&n cone.
custom exhaust 6-2-1 straight through
Bird's custom chip and mapping.(all m30 loom from c101 with 3 wire mod's)
e28 rad and e32 ac fan
100hp nos kit
80mm drop all round
tar-ox brakes (oem size)
Alipna 7j front and 8j rear
Alpina front lower spoiler
Mtech 1 kit inc metal bumber's

I have a howslett turbo from a 7½ ton truck and am just getting the rest together.

[msinger]

i guess its about time i put mine up.

89 325i coupe

drivetrain

m30b35 from 89 e32
getrag 260/6
joefunk mounts
markd chip
ssk
stock 325 rad and driveshaft
3.73 LSD


other mods of interest

Borbet type A staggered set up (fronts 16x7.5, rears 16x9)
bilstein sports with FK 60/40 springs (2.3 front, 1.5 rear)
eibach adjustable sways

thinkin i should go MS then turbo, like to find a nice mtech II kit as well....

open to helpful suggestions

[kylelauffer]

91 e30 89 535i e34 in progress
looking for shift linkage
535i manual trans
driveshaft looking for a 60 inch one. pickin it up soon
e28 radiator.
m30 computer
m20 harness
joe funk mounts

[BimmerScreamer]

Swap in Progress
m90b35 from '79 grey market 635csi
e30 m3 tranny
e30 big flanged drive shaft modified
VEMS
e28 radiator
custom mounts

[Rocla]

Who made those?

http://www.r3vlimited.com/board/member.php?u=19769

He also fabicates superb exhaust manifolds for turbo setups.

[RickSloan]

yea those are really nice

[LowR3V'in]

Who made those?

[JMil86]

I got these saturday:

Nice welds.

[Jean]

They look really good!