How many miles would you run an M42 after it was beeing rebuild, until reving it
Collapse
X
-
i wouldnt run full synthetic on a brand new engine. run conventional for initial break in. it aids in cylinder lap ect. -
I ran 5w40 full synth. oil within the first 1000km.
After the first oil and filter change, I did put in a 5w40 full synth. oil again.Leave a comment:
-
The sticker still on the inside of my windshield says 1200 miles.
Now get on it!
That said, I do watch revs right at first, but also use full throttle as soon as I possibly
can- I've had good luck with ring seating that way...
Right at first being maybe the first 10 miles, btw...
tLeave a comment:
-
Most cars are usually around the 1000km mark I would change your oil again, and go for your life.Leave a comment:
-
BMW has specified 1,200 miles on every one that I've seen (which is a lot).
Anyway, the long run in is crap. I just wasn't going to get into that since you've already done it.Leave a comment:
-
Does this go for all BMW engines, new and old ones, or was this specific for E30 engines back then?Leave a comment:
-
BMW's engine break in is 1,200 miles. I don't see why ou would need to go longer.Leave a comment:
-
How many miles would you run an M42 after it was beeing rebuild, until reving it
I wonder how many miles or kilometers you would drive the M42B18 engine, after it was completly rebuild.
Meaning new bored, honed, new pistons...
How long do I have to drive it, until I can rev it to the maximum, meaning around 6500RPM?
I have 2000 kilometers on the clock now.
An oil change including oil filter was done at 1100 kilometers.
Can I push the engine to the limit now, or do I still need to drive "normal"?Tags: None

Leave a comment: